Search results

try these http://www.altitudehobbies.com/brushless-motors/leopard-brushless-motors/leopard-3536-8t-960kv-brushless-motor with either dji esc's or a simonk 40 amp esc, 9" graupner props on either naza, hoverfly sport or cc3d and it'll fly faster than you may want it to. Your better off upgrading...

the pixim seawolf cams they sell are the best there is.... pz0513, i like 2.8mm, but 3.6 is more normal. The 3.6 makes me feel close, the 2.8 for some reason relaxes me near the ground that is a 3.6mm lens half way in when looking at the sun isn't so easy is from water built up on the lens...

you just use a screw driver and voltmeter...... set it first, then power up when your using it with and check again. if you change cell counts, recheck it. there not computer controlled like where all used to, but there super low power and pretty quiet for a switching regulator

that sure looks like them. ordered a few to see, thanks

Right now that fpv meet in Carlsbad is shooting for Mar 23....... keep your ear here for details, i'll post all about it soon

I'm not sure..... think trappy sells a receiver that gets lawmate into fatsharks since that's all them guys use. ask him, he;d know...... You can get a 2.4 receiver for the goggles, that's the way all them guys go

yes those are good, but rp is bosscam only i think. The immersion 5.8 25mw transmitter and the new immersion uno 5.8 v2 receivers have miles of range. Trappy helped make that deal work. if i was using that system, i'd stick to the fat shark/immersion cp antennas. There cheap and hard to break

ez uhf is a rc radio link. plugs in the back of your futaba radio and changes the rc control to 433 for better link and longer range. that's all it does fat shark goggles have a video receiver in them that is only compatible with immersion video transmitters like the 5.8 600mw....... two totaly...

for the ezuhf part you want the Diamond whip, for the rc receiver, the stock ones in the package, for the video part, you will want to get a cloverleaf 3 lobe for the rig, either a 4 lobe clover or a crosshair. look at readymade under antennas, 2.4 There supposedly is a big difference, i've...

arent you guys limited to the 5.8 25mw transmitters??

it changes the rc control from 2.4mhz futaba to 433mhz immersion...... then you open up 2.4 for video it's the best all around way to set it up

http://aerialmediapros.com/store/index.php you can practically drive to that one http://www.readymaderc.com/store/ http://www.urbandrones.com/ http://www.clubheli.com/Multi-Rotor-Motors-MT_c_151.html http://www.gothelirc.com/ kloners choices

you said a vtx and linked a vrx, boss and immersion stuff is not compatible, pick one or the other brands You want to change over to 2.4 video now, get the lawmate 2.4 stock vtx and lawmate 2.4 stock vrx http://team-blacksheep.com/products/prod:lawmate_tx...

that the system i use, love it. you want this http://www.getfpv.com/immersionrc-ezuhf-tx-and-rx-combo.html looks like this all together

distributors for what?

i don't see any of that type over there. they got them shaft mounted type, not the multi rotor kinds like we all have.

but by then you may as well be in a droidworx, hexacrafter, something made for the weight.

looks gnarly, that's all,,,,,, doubt it'd make in on a zephyr..... he is having a problem on a disco that doesn't fly with a case, most likely a layer lens and them plastic nd filters all the fpv guy use are like there not there...

i'm gonna grab one of them 800 next...... the 650 is amazingly strong, great platform to grown on, flexible in what it'll carry and if doesn't have what you need, ask and i bet it's in progress

you can buy that stuff in plastic sheets that easy to cut and fit in stock cases