Search results

  1. kloner

    T14SGA/h

    you guys seen the basicaly ned 8fg,,,,, has FASST and FHSS protocols, sd card slot......... not a bad price http://www.espritmodel.com/futaba-2-4ghz-t14sga-sgh-rx-r7008sb-radio.aspx?utm_source=newsletter&utm_medium=Futaba-T14-SGA-SGH&utm_campaign=newsletter-2013031
  2. kloner

    DJI "NEW" 10" Props

    if you have dji motors, you know the deal..... it keeps the prop from spinning of a nut came loose. also keeps ccw from loosening nutt, but it makes them impossible to balance, don't fit anything but there motors nobody sticks with for long
  3. kloner

    Which do you prefer? Flying through Goggles or Monitors?

    i forget the exact number, but the goggles as close as they are makes them seem something like 150" monitor..... You physicaly gotta look around like when you sit too close to a tv set. there kinda stressful on the eyes and for me, when that dam multi rotor was within a hundred feet, even though...
  4. kloner

    Hard Case Ground Station

    mine uses goop, got it wet, lined up the monitor with the lid down flat, closed the bottom to it with the foam left in and it compressed it till it dried that picture that came to my email showed 110 volt monitors, you didn't get a 12v monitor? was that somebody else? That one showed velcro...
  5. kloner

    Which do you prefer? Flying through Goggles or Monitors?

    unfaix, that could be a setting......... if you have an sd feed going to an wide screen monitor, it needs to be "fit to screen"
  6. kloner

    Which do you prefer? Flying through Goggles or Monitors?

    they are when you fly proximity, you get overwhelmed at first, but once your used to themonitor, the goggle get the pecker sucked back in again... there also extremely mobile when you got a built in rx
  7. kloner

    Which do you prefer? Flying through Goggles or Monitors?

    i like monitors too.... once your comftorable with the whole thing, try goggles again.
  8. kloner

    Is This Normal

    alot of first person view board cams use a IR filter to clean up your view,,,,, if i had to guess somewhere between that little blue piece of plastic they use and the settings made it color blind. what a weird deal
  9. kloner

    Hard Case Ground Station

    lemme explain what all your looking at. The 16" monitor in the case has a pair of 5000 mah 3s under the deck and it has an uno 5.8 receiver. It's my pit monitor for anybody that wants to look. the tripod with the 7" is labeled in the picture. That monitor can pop off the top, you can put that...
  10. kloner

    Hard Case Ground Station

    16" in a pelican clone everything is the same small cases but i spend most my time with a ground station like this rssi gets shady ol kloners radio rises
  11. kloner

    Undesired Wiggle

    so the craft wasn't jumping around, that was all gimbal? the radian is king of the trail with a price tag to follow..... the brushless gimbals are coming out soon, might hang out for a deal on a controller if you got time. otherwise plan the move to a brushless and forget this mess. the...
  12. kloner

    Naza GPS and Futaba 8FG and R6208SB RX not playing nicely together.

    you ran calibrate in assistant, right? the 8fg does some weird stuff to the pulse,,,,,, never heard of it affecting a dji controller like this Maybe look in assistant and see if the green bars are overshooting the screen. unplug, plug and see if it's movement changes.
  13. kloner

    Inadequate stabilization in windy conditions

    is it getting a fast jumpy movement or slow wobbly movement? what esc's are you using? is a waggle a yaw movement, ele or ail?
  14. kloner

    SteadiDrone QU4D - Foldable GoPro 3 Quadcopter!

    I'm watching apm fly first hand and just don't agree with it beeing the best out there..... no way. The movie footage from onboard shows the apm wobbling around in your own flick non stop, then words next to it saying smooth.... from the dude that says it's the best out there. You can lie to...
  15. kloner

    My brushless gimbal result

    good job dude, set one aside for me
  16. kloner

    Kloner, your Suppo motors

    that needs to be checked if for no other reason than to know.... if you have a volt meter it has a continuity test where you hold the things togetehr and it beeps, is the oly way i know to check it. That'd definately smoke it...... if the red light won't come on, it aint gonna work. might make...
  17. kloner

    New and need advice and information

    no you don't need goggles but you do need a dedicated SD type screen or something. foxtech has 7,8 and 10" versions. there in my way of doing this a better way to go. The goggles are so immersive, it's hard to fly and have your senses stretched out like they do. Laptops are so delayed it's not...
  18. kloner

    Kloner, your Suppo motors

    center is positive?
  19. kloner

    Kloner, your Suppo motors

    if that's a 500mw lawmate, it's 5 volt I've never seen a light on a lawmate transmitter, receiver does..... show me some pics of what you got going on
  20. kloner

    Kloner, your Suppo motors

    i use the eagle tree like the zii video above on my rigs.... Barts xy8 has it, works bitchen. i've never liked that ezosd, dunno why, it's just not very configurable. the ET you can have 8 different pages of on screen info... alarms can pull up other data like low voltage, mah, and thing on the...
Top