Search results

  1. kloner

    Hoverfly PRO/GPS Firmware Update v4.8 Beta

    I'm a FFF fpv kinda guy, notice it says in future your gonna does that mean if i try to fly it fff w/ ah on and increase the throttle that i might tweak out the algorythm as it's written now?
  2. kloner

    Hoverfly PRO/GPS Firmware Update v4.8 Beta

    by stating to put the radio back to defaults means 100 and -100 like on or off as it does before just not a tuned gain. it didn't say remove the wire or set the endpoints to 0. that said, gotta imagine it's still on or off with the switch
  3. kloner

    First Video Flight - Something Went Wrong

    i agree, the stick shoulda broke, not popped off like that.... i'd still watch them bullets on the side that fell first.
  4. kloner

    Hoverfly Today's excitement, Hoverfly PRO beta firmware first flights

    I'll make sure to turn off the cam,,, no worries... I really hope this works, last time was a $1000 crawl back to the sky and i consider myself lucky it wasn't alot more. one more time for the fans
  5. kloner

    F550 Radio Setup

    they can come damaged. Have you ever read the internal resistance? When damage occurs, that's how we measure it icharger, thunderpower, FMA chargers have it, maybe others. Even a bad solder job on a connector can make ir rise,,,, why you look at the individual ir and the main lead ir and...
  6. kloner

    F550 Radio Setup

    that things never worked very good but to answer your question in general, a pack can be damaged from one over discharge to the point a 25c quickly can turn to 10c....... and still say 25c on the outside that voltage warning thing looks at voltage under a load, if the voltage sags hard, it...
  7. kloner

    Hoverfly Today's excitement, Hoverfly PRO beta firmware first flights

    if that happens i'll be swiftly rubbing one out on my rig..... shoulda got that insurance
  8. kloner

    uas regs

    i'm law reading retarded, wasn't sure if that was something new not talked about or not. UAS is unmanned small. not sure if there is a difference between fixed wing or rotor.... there gonna draw the line in the sand on weight, and can't remember if it was 5 or 25 lbs, but it's in that range for...
  9. kloner

    First Video Flight - Something Went Wrong

    the only problem i see with a majig eraser is it might decompose on ya faster than something else. the key that happens with earplugs is your able to record at crazy high res and with zero jello even out of tune on the multi rotor and a big part of that is minimal contact on something firm...
  10. kloner

    uas regs

    Can one of you smarter gentleman translate this to me in simple english? http://www.faa.gov/documentlibrary/media/notice/n%208900.207.pdf
  11. kloner

    Hoverfly Tried the competition...

    Yuri has been trying to explain the throttle and altitude hold part of dji forever, now you get it...... increasing throttle makes the controller climb rate become controlled in fps instead of just more throttle or less throttle.... That part is what makes flying them proximity vids i do on the...
  12. kloner

    Basics of Setting up Eagletree elogger and OSD PRO on a multi-rotor

    sorry your having so many problems. your possitive the top and bottom 4 way outlets are plugged in proper? might post a pic just in case... might open up firmware updater with everything plugged in and wiggle wires, note if osd pro shows up and turns off doing so. that is the first place a...
  13. kloner

    Which do you prefer? Flying through Goggles or Monitors?

    ezuhf is instead of the 2.4 radio transmission you use. it plugs in my trainer port and takes over the rc control. the 2.4 lawmate is the video tranmitter, it is compatible with 2.4 duo, that's what was in the video. that is eagle tree osd pro
  14. kloner

    Futaba Radio Trainer Mode

    the futaba wireless setup worked for us really well, but even that was a pita to program and get working
  15. kloner

    Aeronavics / Droidworx Droidworx Retracts - Servo keeps pushing when legs are up

    are these the new ones? My orders been waiting to ship 2 weeks for some part that was a problem on the new skids.....dunno what it is..... but something electronic so that has to be the retract part....
  16. kloner

    Basics of Setting up Eagletree elogger and OSD PRO on a multi-rotor

    if it's not seen in firmware update something is dead... if it is in update but not seen anywhere else, thats not matching firmware. They have excelent support, but you gotta do it the right way.... with everything plugged in and looking at it all in eagle tree software, hit "help" display file...
  17. kloner

    Basics of Setting up Eagletree elogger and OSD PRO on a multi-rotor

    you mentioned updating the logger, but nothing else, try going back to the firmware update screen wth everything plugged in. Also make sure the polarity of the plug from osd to et logger is good. I've literally blown smoke out of this gear and it still work perfect. I'd be surprised if...
  18. kloner

    Which do you prefer? Flying through Goggles or Monitors?

    I tried em all and settled on 2.4 for video..... works best.1.3 is pretty powerful, but it's better on rigs without GPS, 1.3 interferes with it. Can fly behind dirt mounds miles away feet off the ground with it. dis is feet, right ladder is elevation. all my rigs run ezuhf and 1 watt lawmate...
  19. kloner

    Hoverfly HF Sport and UHF noise

    i agree with Jeff,,,,,,, not the ultimate, but well within range. That's why these big wings are so popular, easy to spread it all out...... my zephyrs are sub 95 all powered up...... Are you guys extending the antennas up and out of the waterproof quads? the core has to be insulated if your...
Top