Search results

they all need a pc to make work. Your basically configuring the radio to the controller, they all have alot of options like ppm, pwm or sbus input, it doesn't auto detect, you have to click it. Have to calibrate naza to your radio, set endpoints on the mode channel, make sure left is left, fore...

theres two main balancers that work.... Dubro friction balancer, imo that ones good enough for a hobbiest but if your chassing out minor flaws in your system, step up to the Top Flite magnetic. if you spend the time and make it so the prop can be let go anywhere on a magnetic balancer like that...

when you open the naza software you can't hit cancel and it opens up? maybe cause my first one was so long ago, but i remember there server being down before and there was a workaround. you get so many without logging in. it is most likely the radio that isn't setup unless your using sbuss and...

i don't ever remember getting an activation email...... the assistant just worked after registering and the screen telling you to register quits coming up.

no, just use 3s packs

the video i watched was plastic props on dji motors and that whine was the motors bearings...... no props you wont hear alot of whine from bearings but get a prop on em and they sing like i was watching....i blow out a few motors from time to time and right before bearings get crappy, you'll...

it's a huge pcb that you can trace the pads pretty easily. there is a +12 volt, a ground and a video signal pad...... a multimeter goes beep when you hold it on the connectors you show and inside the monitor. the only trick is theres a ribbon cable that makes the screen power up that is easiest...

like t did is fine. made mine so it can't fail, one of the big fpv rules of thumbs is zero failure point or at least minimal fail points to go wrong......

I opened up the monitor and made a wire straight to the pcb with a deans on the end of it, then the deans has two wires coming off it, one going into the monitor and another with one of those 3.5mm power connectors that goes to the immersion receiver. something like this

see how it's inline with the osd text? thats causeing the streak, try lowering the white level on the osd if it has it, otherwise try the camera. might be called text brightness

the high pitched constant sound is the motors, the in and out noise is the props when they hit perfect balance. If you fly a 3d plane around and get it into a hover, you hear that when you make it up onto the prop and it's flat. The more balanced the props are the more that transition sound from...

aerial media pros has a few options

mine are like 110-110-100-105 then 100-100 in both a 650 at 9 lbs 2814 12" and an 800 3515 13" 16 lbs

I have an alexmos from cgs shop that i can fly at my house or the desert and it's flawless, get it within a mile of the ocean and it goes nutts. I was thinking the way the propellor gains hit the thicker humid air was to blame, but now i'm thinking moisture has something to do with it like in...

Bill, are you near water or in a humid environment? Daniel?

no, you see me halfway down the fairway in the trees to the left. It was all flown fpv in an olive shirt, my camera man is in white and the security is in orange That golf course is $250 a round, insane how beat up they let it be. We have pretty brutal weather, but that bad boy is right next to...

if you grab one motor at a time and feel for any play whatsoever is there any? check it after a flight when it's warmed up are you using a magnetic prop balancer?

Aviara hole 17 today. Got a weird monsoon thing going on, little rain here and there

big money is security cam 2000 pz0513, the best camera ever, get the board one, slides right in to the disco. cheap money is pz0420. it sucks flying into a sunrise/sunset, daytime is alright. You can see things in your way better with the pixim 0513

is getting in the game...