Search results

  1. kloner

    Alexmos IMU

    if you get that right and it's still weird, try reversing the motor next to motor power....
  2. kloner

    Po Po

    http://www.rcgroups.com/forums/showthread.php?t=1889173 we called the cops and they insist there is a ban on any city property that no drones including tethered like a kite can be used......
  3. kloner

    Show what you filmed - Post Your Video Here

    thanks, we got a lot of stuff starting to finish post production coming out.... been busy
  4. kloner

    Show what you filmed - Post Your Video Here

    We tag teamed this with drone dudes and a full size heli....
  5. kloner

    Po Po

    and everybody gives trappy crap, that's the only way you can film cool scenes...... gorilla style, come in out of nowhere and fly off a few feet off the ground so they can't see ya after a few hundred feet away
  6. kloner

    Po Po

    it never closes so you can just walk on in there. theres 2 police stations there, a ground one by the entrance, a harbor one with a boat on the end.
  7. kloner

    Po Po

    Just got off the Phone with Andrew from Hexacrafter, he called the city clerk and mayor and they both searched and no law is in affect. nothing has been voted by the council or the people. i never saw any signs. Realize it was a pretty big set, TNT reality show, permits, full production company...
  8. kloner

    Aeronavics / Droidworx DroidWorx Completed Builds

    we were out in New York setting up at a camera house and got papparazi'd
  9. kloner

    Po Po

    The other night we were contracted to go film on the Santa Monica Pier. The production company pulled all the permits so it had the cops on set providing security or baby sitting or whatever. Apparently somebody in the area has been screwing with people out there to the point the city made an...
  10. kloner

    Lets talk insurance

    we use both what trec-r posted. transport risk is killer, they offer full coverage down to liability only. They even offer product liability on uav parts which is hard to find as well.. Killer company, the boss has a phantom and is hooked. They also offer red waivers for minimal fees so your...
  11. kloner

    TBS Discovery Pro

    so the boss ones are pretty dope too. they do need to get voltage from an esc tab on the bottom plate and they are rated for 4s, but they tend to burn up over time, especially on teh bench or ground. They power up, gotta get em flying with air over em the lawmate 500 are ridiculously reliable...
  12. kloner

    TBS Discovery Pro

    1 if you got the lawmate 500mw it is 5 volt and will plug straight into the board through the vtx cabling, just make sure to solder to the 5v tab option..... is that what you got? 2 yep, 6s. i've ran it on 6s skyjibs and 6s discos 3 yes lawmate, i use the lawmate receiver too. the pair has the...
  13. kloner

    prop balancer

    yea, saw it on but then i seen he is out. Hopefuly a new batch comes in soon, i'm sick of this balancing game, anything is better than looking at 20 props and a magnetic balancer. It'll make a grown man cry
  14. kloner

    Blackmagic Pocket Cinema

    will the lanc control do focus and zoom on any lenses? which ones?
  15. kloner

    Inaccurate Voltage with IOSD -

    log all the internal resistance and keep track of what is doing what. That's the best way to "watch" a pack, i mark it on the sides of each pack and look at it every other gig. usually just look at the main connector and only dig deeper if it has changed. as in look at each cell. pretty sure...
  16. kloner

    Inaccurate Voltage with IOSD -

    usually nano show a ton of sag, thunder power usually have a super low internal resistance and sag should be minimal. When these cells hit 80%, they start getting lazy and you can feel it. at least i can, it stops reacting right and voltage goes from dripping off .1 volt at a time to multiple...
  17. kloner

    Inaccurate Voltage with IOSD -

    it was landing at 21.3 but the rest voltage was 22.5 still...... that is the sag. That was an exceptionaly heavy load, 16 lbs on the hanger. with a dslr the thing barely sags, but it hovers more like 40-50 amps in that state I have an engineer for a camera man so we flew the rig a minute...
  18. kloner

    prop balancer

    are these dynex guys gone? site doesn't load
  19. kloner

    TBS Discovery Pro

    haha, the infamous all for not get a nice memory card, ever since i just walked into best buy and bought sandisk extreme, my hero3 hasn't missed a beat. Mine used to fight me like yours everyday all raw, no post. Switched over to all orange and it's letting vibes in and it's bucking a tad...
Top