Search results

  1. kloner

    Take free flying lessons from this guy!

    spectacular yard sale....
  2. kloner

    Alternative Powering AVL58 Video Receiver

    yep, the lipo is 12.6 fully charged. just be careful about running the motor cause your alternator should be 14 volts.....
  3. kloner

    Blackmagic Pocket Cinema

    we use the gh3 and that 12-35 lens and we just picked up the 7-14... i like both, but the 12-35 has the iOS and it does smooth things out a bit. The video files on the black magic are really nice, but a lot of us are waiting for the gh4...
  4. kloner

    Blackmagic Pocket Cinema

    imo the blackmagic pocket by a long shot unless you need photos
  5. kloner

    Beholder Gimbal twitching- can it be tuned?

    Try this, Download the alexmos gui that matches the firmware you have on it...... open it up[, connect to the board and see if sensor errors are present, it's a red number on the bottom of the first page...... if it's zero, i'd say it's the balance or vibes, if it's shooting errors it's usually...
  6. kloner

    Beholder Gimbal twitching- can it be tuned?

    saw it, and it was all flying right? does it do that on the ground? what i'm getting at is if there is no vibrations does it jump around? from that shot, i can't see the imi wire, motor wires, camera live feed wire if there is one.... wanted to know if it's all tidy with no wires tightening up...
  7. kloner

    Beholder Gimbal twitching- can it be tuned?

    does it film like that without the motors on? when you move the gimbals axis', does any wires move too along the way, like there pre tensioned and moving?
  8. kloner

    Av200 indirect drive brushless upgrade demo

    PH has a couple reds to the best of my knowledge, go borrow one of theres and show us whats up..... were in the market today and want to buy one but it's only purpose is to carry reds...... It takes absolute perfection in balance which is what i always thought was gonna prevent the av200 from...
  9. kloner

    Alternative to Tiger MN4014-11?

    I left some 15" tigers with bart and he was suppose to do a comparison on his bench between the two props statistically wise....
  10. kloner

    Hello from Las Vegas Nevada

    welcome, your not too far from me,,,,
  11. kloner

    Alternative to Tiger MN4014-11?

    I think u5 is the new 4014..... http://www.rctigermotor.com/html/products/u-power/Power-Type/
  12. kloner

    Cinestar brushless pan axis mod?

    i like belts over direct drive on all of them, esp yaw
  13. kloner

    TBS Discovery Pro

    try lowering the gains the self leveling gets sloppy but it'll lessen if not eliminate it... i'm in the 90's in basic and 80's on atti
  14. kloner

    Is there a single RC Joystick for 360 gimbal?

    you can change the radios setup and put it all on one stick without buying a new radio.......
  15. kloner

    Just getting into gimbals please help, what's a good controller?

    http://gothelirc.com/shopdisplayproducts.asp?id=231&cat=Brushless+Gimbal+Controllers third one down,,,,, theres a new version coming in next week or it might already be there,,,,,, email vu
  16. kloner

    Just getting into gimbals please help, what's a good controller?

    doesn't matter as much at this size but i'd get the viacopter brand alexmos board..... there solid and the new one coming out now is even better
  17. kloner

    Show what you filmed - Post Your Video Here

    that was a full production local 600 shoot in Jersey. because of such, they tried pulling aerial permits for us but luckily they didn't ask the right people and there people gave up the wrong answer. Our flights wound up being approved by the mayor of Newark and the senator of New Jersey. We had...
Top