Search results

i have windows on bootloader so it is an actual windows pc at that point, but you can try..... i build gimbals for hire and the last firmware upgrade won't go, says something about you have v .53,,,, huh? reboot to windows and it just loads then back to my mac bgc app and it'll connect fine...

were getting one of these to play with. Talking to them at the ama show something about the sd memory and the software weren't ready? is yours fully functional?

we've been flying science instruments on a naza based hex with ground station,,,,, we nail waypoints usually about 70-80% of the time..... the payload kinda has alot to do with what we see too, it's not conventional... my atti gains are somewhere around 90 but there on a dial and i try messing...

Put the hex file in a main root folder, and macs won't write them for some reason, gotta do it from a windows based machine. at least to go 2.2 to 2.3 you do

that hack bart mentions is only on a few of the jr radios, for example it does not exist in an 11x. pwm with any radio would work well with the a2, it's the single wire connections that give it fits. Theres so many types of ppm and i think they kinda targeted one particular type..... the jr sat...

this is what he is talking about http://www.readymaderc.com/store/index.php?main_page=product_info&cPath=11_62_12&products_id=1405

ups is twice as fast as any other option

the first two clips are a $45 cam http://www.securitycamera2000.com/products/600TVL-SONY-SUPER-HAD-CCD-D%252dWDR-Color-Board-Camera-with-OSD-Menu-DNR.html 0513 http://www.securitycamera2000.com/products/690TVL-Ultra-WDR-Pixim-SEAWOLF-Sensor-Chip-OSD-Camera-2.8mm-Wide-View.html

just to look at more, this is sc2000 pz420, can see how the glares get it pretty hard.... then pz0513

they come with the ezuhf... bunch of ezuhf install pics, i use a rasp and sand half the handle off then use that to support the antenna. Theres alot of ways to skin a cat. Biggest thing i do is bail the link needing plugs on em. have had em come loose on the ground several times, so i open em...

the newest wk firmwares, like the last year you do not do anything for declination, the software does it based on the gps location so you just point them straight ahead now. to find mechanical faults you will have to troubleshoot the rig after a flight, use atti instead, give it a flight, go to...

my wkm was horrible in wind, the a2 hangs in there pretty good....... it does the gentle lean and doesn't hunt around for a cm spot on the ground, it behaves like i remember the hfp but has gps that works and altitude hold that's extremely refined......

we use somewhat large packs and a 1000watt charger, but i can kill the battery on a f-150 not running in about 15 minutes, rendered useless..... i can run my truck, the risk is if for some reason the pack has damage (it's something you usually know you did) and is charged, can puff into a simple...

this was bone stock gains dialed in on a first hop from a dial on the tx. see the stability, if your seeing anything less, look for heat when it lands in motors or esc's..... i've seen alot of stock motor/prop not work real well from broken/bad balance even new out of the box....

the gains should remain close to default, forget what that is now, but it's usually really close. Easiest way to adjust gains is to put them on a knob or slider on the radio. i use one channel for manual gains, another for atti gains and i move them proportionately unless an axis shows a sign of...

for something with 8" props to carry another 150-200 grams is too much,,,,, like a second hero onboard a phantom

with small motors cg is everything. hold two opposing arms, balance, hold other two, balance, should be balanced on all axis flat and level. Then the ATTI gains will have a pretty big influence on how gps mode works, how tight or loose it is.... loose it won't get to the spot your trying to get...

agreed 100%

i use it like contact cement on both surfaces, let it tack 10 min and it has no problem sepperating later. it's in the angle of the dangle, twist the component and it pops right off, pull on it and good luck.

do you got any captured feed to share tom? i'd love to see what your seeing. is it pixim or some other sensor? the pixim isn't quite as good in the dark as the tbs 69 but pretty dam close. I can fly in the cam way before i can see with my naked eye..... it's sketchy as hell sending off a 2000...