Search results

they sell a 4 pin plug that you put on like i still described, small molex in a big connector. think there a $1 when you add it with the camera

yellow black and red in your picture are the three wires you need. i usually unclip all the other wires from the main plastic clip except those three and solder them straight into the system

i was just making sure you knew the white wire coming out of the osd is the video feed, not yellow like you'd expect. was making sure you knew that, otherwise it doesn't work like i think your experiencing

are you using the white wire for video signal?

these are an old set of 5208 ipower.... those are the new version you linked. better yes My rigs all have vibe iso, either droidworx or hexacrafter This gimbal is from hexacrafter but it's modified. similar to v's gimbal at gothelirc

i like the uno with a set of ULTRA bluebeams

there limit is 25mw..... if in fact there is a fpv version then get it, but i can tell you the fpv co branded versions are really good. i've seen people here have problems with a liliput that they couldn't get 10 feet away Team Black-Sheep worked with immersion on there 25mw and got over 5...

not reliably. this frame is pretty maxed out at a hero and a gimbal imo.... 650mm - 800mm does better lifting those loads, 2814 motor.

very cool..... because this modified the focal lengths and i'm messing with all kinds of lenses i had to get a few more things. mainly an hdmi cable so i can hook it up to a monitor to see what i'm adjusting setting backspacing. As mentioned i bought and got the rokinon lenses but already...

thats pretty cool. most people don't know what to do wit them and are intrigued to meet us, like were martians

I've been 18 miles out on this stuff, works great. Have fun

the lilliput sucks, get a real fpv screen, they have firmware changes that makes them show static and you'll want that. the fatshark setup is good. to run the monitor using an uno works alot better than the internal rx and cp antennas are almost mandatory on 5.8. That exact kit seems like...

says february.... http://www.shop.dynexhobby.com/prod1.htm i waited four months to get my paws on one. They must make em in batches of 10, but it seems to be speeding up. missed a batch around new years but got one last week

You are able to set the elevation and it has a ground collision avoidance warning if it thinks it'll hit so that does two things, makes it touchy to program and it leaves it unable to program in proximity like i'm used to.....down low..... this is the part that made it hard for us to use for...

i usually glue them in or alot of times the squeeze between frame plates, but i recomend using heat shrink on the heat sink so it doesn't ground the airframe. cases aren't much heavier. these fit the old disco, but not the new disco pro....

have you ever contributed anything useful to this board other than the other pink meat? It's really getting annoying

all fpv monitors come with several different pal and ntsc types, it's in the monitors settings. try getting to that and flip through the various types of pal and ntsc cause sometimes those work better mismatched than on what you'd think it's suppose to be on. just boot it all up and switch...

the difference between the quality of image between hero2 and hero3+ is huge. filming in 2.7 does make a difference when you dive into an edit. the color might be a tad better though in 1080 24p than the 2.7 but the clarity is money. unless your gonna replay in slo mo, filming at a higher frame...

for you guys not following the tbs threads the gimbal mod levers are out. if you don't like the head banging (random gimbal movement) try one of these on for size.

I sent him a part to warranty 3 weeks ago and never heard a word, doesn't reply to emails. my guess is now that they have an actual base of users the problems are starting to rear there ugly faces. I've seen very strange behaviour from this thing, Drew didn't seem to want to hear it. Reminds of...