Search results

Selling a brand new DJI Wookong M, never used. New in Box. DJI Wookong M 2.4Ghz Wireless Data Link 50 Waypoints Blue Tooth LED $920 with free shipping within the USA.

I have 8 x AXI 2826/12 Motors for sale which have the Short Shafts for Multitrotor use. Please contact me at rory"at"minefilms"dot"com

I had a prop fall off mid-flight on my F550 and subsequently crashed. Anyone have a source on replacement bolts to lock the props in place? My spin off and is nowhere to be found. What size is the bolt?

a friend crashed my F550 with Naza M + GPS and I'm trying to get it running again. I suspect the GPS is broken as I can't get a lock hover and its all over the place. Instead of buying a GPS replacement could I purchase the Naza M Lite with GPS and use the GPS on the old Naza M?

I meet Al at NAB and was impressed with the new gimbal and have been emailing him repeatedly for more info but no hear a thing back so am starting to wondering if they are still in business. Anyone know how to get hold of them?

Selling my DJI 900mhz Data Link + 5 Waypoints Please contact me for details. rory"at"minefilms"dot"com

I'm planning on running 3 x 8000mah 5S batteries in parallel to get a total of 24000mah. I only have a dual charge Hyperion EOS0720i-SDUO3 so can only charge 2 batteries at a time. I'm used to using only 2 batteries and charging them in sync mode on the charger. Can anyone advise me on how I'd...

Anyone out there with more knowledge of the Wookong M's Voltage Monitor and Heavy Lifting SkyJib 8? I have a SkyJib 8 with AXI 2826/12 motors 65Amp ESC's 15x4 Carbon Fibre Props 2 x 12000mah 5S 100C constant batteries I'm seeing only 4 minutes flight time with my full load (total weight 12kgs...

I'm selling my 2 x Turnigy 8000mah 5S 25-50C $88 each 2 x Turnigy 2200mah 4S 45-90C $28 each Almost new condition. 8000 mah's only charged/discharged 4 times. 2200 mah's only charged once. I've gone with MaxAmps 100C for my SkyJib so need to sell these. Shipping within the USA $17...

I'm still fine tuning my SkyJib 8 with AXI 2826/12 motors and 15x4 CF props and I have 2 x 8000mah 25-50C 5S batteries. On my first flight I got 12 minutes flying time after charging both batteries at 2C which took 1.5 hours. I then did a quick charge and at 5C which took 30 min to charge both...

Hi all I'm almost done my SkyJib 8 v2 build and have the Droidworx Retracts. Please could someone help me and tell me how I get the servo on the Retracts to stop when the legs are up. It seems to keep turning but as they are already up and extended it can't move anymore. When they are closed...

anyone now what the license requirements are for aerial photography and filming using an Octocopter in Canada?

I'm building a SkyJib 8 with a PhotoHigher AV200 and wanted to work out what I'll need to power the AV200. I'm using 5S 8000mAh Lipo batteries to power the SkyJib but what batteries are best to power the AV200? My rig will have AV200+ 360 Pan Kit Skyline Stabilisation HDMI to Composite...

In the Wookong M manual is says... If you use 3rd party ESCs, please cut the red wire (power wire) of your ESCs , as the power from V-SEN on PMU is suitable to most of receivers and other electronic devices. I'm going to be using MayTech 65Amp ESC's on my SkyJIb 8 so should I cut the red wire...

I'm building a SkyJib 8 version 2 at the moment and wanted to mount an arm/pole pointing up to the sky to one of the booms, so I can mount a GoPro3 to this pole as a FPV camera and have it point slightly down to see the SkyJib frame in the shot so I can judge distance from obstacles easier. I...

Please could some help me. I'm trying to figure out which OSD to go for. I have a DJI Wookong M with GPS and the 900Mhz Data Link. Should I get the DJI iOSD that ties into the Wookong's GPS or do I get the TBS ezOSD that has its own GPS? I'll also be using a ImmersionRC FPV 5.8Ghz 600mW Tx...

Hi there I'm new to this forum and have built a DJI F550 with Wookong M, using 10" props and 1x Zippy 5S 5000mAh battery. My controller is a Futaba T10CG with R6014HS receiver. Everything built fine and tested, I set up the Wookong MC using the software. I first tried flying in ATTI mode...

Looking for a PH AV200