Search results

Thanks Crash.. I have carefully removed the BL and made sure everything was good. Carefully re-fitted it with new cap. Now I am getting two blinking red led's and from the MK wiki it looks like this mean phase B is.. knackard.. Is this the correct assumption and does this mean the BL is stuffed...

Great job Bart.. looking forward to seeing you other builds Dave

That may explain it. What TX/RX are you using Baker55 Dave

So is it going to be able to fly like a plane as well as hover around the garden!?

Yeh Tell me about it... what was that rain about today!! Crash.. seems like the cap is duff.. have dessassembled the trouble som BL and re done it but to know avail. I think the cap is faulty so will ry replacing it tomorrow.. do you normally tin the cap legs before you assemble it or what...

Thanks Crash.. I intend to take out the dis board and double check everything again.. I check out the wires. I did flow some more solder round the cap which seems to have solver the problem but I could only get at it from having the MR upside down so not really happy. Will remove power dis ring...

Bart is your AD8 a heavy lift? Not sure what props I will want on my ADXhl so I may be interested in some DAve

Bart.. if you want out printed let me know I can go to A2 on pretty much anything.. DAve

Will post the whole build when I finished.. cozI am waiting on some bits I tried 4 different props on it.... It flew fine in the garage but the wind on four different props gave it the wobbles! Sorry Jes if I broke the holy grail ..... cc board on MK frame! It was very cheap and I was baffled...

Crash before I even go there I am guessing its a link to Chubby Checker! Just been there and yup... chubby Checker :-))

There are mutterings for end of July.. I think the first run sold out overnight.. ish! Love mine ;-)

Totally different flight control system.. NO comapibility, not unless the guys at Open Pilot are not telling us something!

Ok I started giving stuff a bit of a wiggle..found I got a beeping and allmotor stop whe I pushed down on the cap thingymabob. Looks like I could have a dry joint on there.. I strip it down tomorrow and check the solder joint on the cap to the dis board and the bL. Also I found that the temp...

Thanks for posting... guess Dallas will need to watch these!

Ok I still have intermittent fault on same BL and motor. even though the MKtool reports no error the motor on it does not spin up its just stuttering.. If I remove the power for a couple of mis it may or may not start up or I get a BL error.. GRRRR.. thinking BL and motor.. any thoughts? I...

You own a camera shop Jeff!? That looks very smooth, is that your flying or the $4000 camera?

I have seen in the MKtools set up a way of getting to the BL. ALT and settings throws up a BL control panel but is was greyed out.. I think there is a temp max limit in there but cant remember. Not sure what it would be for though. I will go over it all again tonight and double check the...

Thanks bart I look it to that.. tonight.. back to work now.. DAve

Sorry.. reflash firmware? is this to the BL or the FC? Dave

After successfully rebuilding my ADX3 I still have two issues. She fleis fine BUT I am not really happy as I have the following issues. 1. I have a missing temperature reading on one BL 2. Sometimes one motor.. the top rear does not spin up at motor start and I get a ERROR 3 on the jeti...