Search results

Touch and goes on say four different landing marks spaced apart traveling clockwise the anti clockwise dave

Have you checked your TX input in the MKtool to ensure the stick positions are neutral? You may need to adjust your servo inputs in the 22MX. Dave

Morning / evening James. Just a quick one could you link me ti the latest version of the MAC GCS and firmware. The one I use throws an error at start up and TX calibration does not seem to work to well. I am not sure if the latter is causing me to have to re trim the quad after each...

Hi crcr Welcom to MRF.. Yep I am still alive! Thanks for asking. The bollocking was not as bad as I thought it would have been, mainly I think because she has seen how hard I have been working to get my ADX back up in the air after my crash. Hope you enjoy your experience here at MRF. We...

Maybe I'm a super chicken!.. I have tried to mimic the chicken head while filming with head cams for years. This short movie was taken down a really steep track in Scotland. the second half when I can get some speed up gets smoother filming but the ground is just as punishing . if you watch the...

Motors http://www.giantcod.co.uk/keda-2020l-1053kv-hacker-style-brushless-outrunner-motor-p-245.html ESC http://www.giantcod.co.uk/hobbywing-brushless-motor-25amp-speed-controller-p-265.html I got these coz they were cheap and would give me enough umpH to lift FPV equipment. Not sure on...

MK have released a new nav control good for 500m.. cant find it on the MK site but details here http://shop.jet-1a.com/product_info.php?cPath=472_486&products_id=1882&osCsid=e14d16ca9d259941abbc662d6e43f89c Dave

Hey Denny thats some really interesting stuff there.. I did watch all the vid to the end.. wow nice moves.. many moons ago I skied for Barrett's ski team, was topout man in the the pyramid the one behind the chopper. I also demonstrated long rope jetty barefoot starts but them guys sort rope...

How cheap do you want to go I got four motors and four esc's for under a hundred quid! I can list um later but got to go to work.. I also got emax on my Gaui quad but not those.. think 1450kv may be a little high but I aint an expert just going off what I have seen on others they seem to be...

Nice one Bart.. u towing a banner there as well! ;-) Thought you would have brought something back from Disney to put in the cockpit!.. Super Ted just seen it and he reckons he could handle the bird, he just brought me his luxury padded envelope over! DAve

I did start this thread some time back with my startings.. I have taken it further now with testing procedures and maintenance scheaduals for my own craft. http://www.multirotorforums.com/showthread.php?168-Pre-amp-Post-flight-check-lists. Also Reece has also got one on here...

James which one.. The one I am using throws an error about the libary and something about valid Qt

Is that using the windows or mac version? IS the Mac GCS ok now or should I use the windows version?

Good stuff although the last half when streight over my head but I am sure some of the tekkie guys will understand it.. Thanks for taking all that time for making and explaining Dave

Nice kilby especially coz u have fixed camera.. did you tune your cc after watching the video?

So you have two power feds to the FC? one from the molex and one from the battery? Not sure if that is good.. Congrats on the maiden.. now go do the flight school... over and over and over... https://sites.google.com/site/mkokto2/training/flght-training Dave PS and get yourself a...

Thanks Eric.. I knew it had happened to others and with hindsight if I had stuck to my OM checking procedure I would have taken them off. I wrote it in to my OM when I had seen a couple of posts on other forums, but the weather was the best we have had all summer, blue skies and zero wind...

Well I am still alive! She was very understanding and also very sorry coz she has seen me pulling my hair out for the last few weeks and knew it meant so much to me that I sorted it and this one stupid mistake has set me back again... best go buy her some flowers.. YEP Try down grading the...

Cant really comment on the motor start up coz I am using the MK BL's but I am sure its got to be something in the ESC's. Throttle curve in the TX is good.. I have mine with two settings one for camera on and one for camera off. There will probity be a way of doing in the MKtools so you can set...

Have you calibrated your channels? What Firmware version are you using?