Search results

I just got some GT Emax for my CC quad.. very smooth.. feel nice and good components.. Just flown them and there silkey smooth.. well not as smooth as my AXI's but for £15 each they seem ok.. there is a good rang for MR's check out the specs...

Hi Sebbie.. I just rebuilt mine coz I was not happy with the way I threw it together.. I have got some different motors and tidied the wiring up but apart from that I just fired her up in the garage and its as stable as out.. with the settings I sent you Dave

I think that withany round tubing gettint the motors spot on is going to take a bit of fiddling. With the coaxial its even more fiddly.. You can have the bottom mount abbsolutly bang on but the top one will be out 3mm at the blade tips.. I usually start by getting the bottom spot on then slowly...

Read the flight school pages here This is my warm up before flying with the camera on and to test the bird. I fly one pack using these moves to get my thumbs warmed up! https://sites.google.com/site/mkokto2/training/flght-training Good luck and please take it easy.. I have seen to many...

Bart.. when you get it you will see what we are talking about.. you cant get the heat on bothboards. I use a 80watt iron at 480ºc and theres no way it will heat both boards up because of the gap between them. Dave

All the boards I have bought have come pre assembled.. The BL's need soldering in to the distribution ring and the molex.. ahhh yes that little beuty.. I got a .4mm needle tip for my iron for that one.. Tin the two outerpads and the center little one. use the center little one to get the molex...

Hi Midnight999 Welcome to MRF.. I am sure the BMFA will have your details.. give um a shout. Where in the country are you... nice build keep us informed Dave

Yeh.. Its really helpful if you post your location.. that way we know who is near us.. Dave

Which ones Boris? Dave Hows it going

So... you like the config Ken? Dave

Rob and Linda have been very busy with their new team and have been able to concentrate on their innovative new products. Check out the new V3 Airframes here http://www.droidworx.com.au/ADseries.html

This looks the dogs jobber... http://www.droidworx.com.au/Nova.html

Juz.. their a great little board.. Now I have finished rebuilding my ADX I will start on my CC quad.. I built it originally in a hurry to get something I could fly while I battled with the ADX rebuild.. Love it.. I built mine from scratch and set it up and was flying around the sky in less that...

Cant see it properly but are you sure you have the motors assigned correctly.. I could send you my config file if you want it.. Dave

Thanks DB I thought I was going crazy.. People on the german MK site seem to of lost interest in the issues I had. Ho Hum... nowt like learning the hard way. I asked loads of questions and got a few helpful replied on the GMK forum but nothing about the status lights flashing in MK tools...

ARE YOU REALLY CONFIDENT? Make sure you have no doubt that EVERYTHING is perfect before you put the props on.. or if you do.. tie the bugger down. Dave

You have got the polarity correct aint you?

You have calibrated the system havent you? Dave

I have video evidence on my Youtube channel Dave http://www.youtube.com/watch?v=wAmVILCUJ7k

That looks far to easy! ;-)