Search results

The leads on my batts are 10gauge.. its a snug fit but it fits nice. Just take care when you solder the wire on to the tabs not to go over the line or let any solder run over the edge. There is a video on there site I think that shows the process. I did mess up the first two I tried so went and...

There should be a velco strap with the battery mount which you need both plates on ONE side of the gopro mount. The velcor strap is long enough to strop 2 overlander size 5000mah batteries to the mount plates so I am not sure what has happened to yours. The go pro mount should also come with a...

Hi SolMR Welcome to MRF. I guess the multiwii just aint that popular... I think most start off with the Gaui kits as they are pretty tough and you do get a reliable and well proven FC. This time last year I was trying to fly single rotor helis but they cost me a fortune in spare parts...

Just checked and the Traxxis does accommodate 10 gauge.. they are really nice to use. Dave

Gunter you using that a a 6v distribution board?

I use the one Gunter just posted on the extension PBC.. I aint tried the Traco. I am right on the limit of MTOW with my ADX3 HL with two 5000mah 4c overlanders, AV130 and 550D. At the moment I have tried flying her with three battery packs, one as just a weight and with the two 5000mah I get...

Have you looked at the Traxxis.. I am sure the Overlander 5000mah's come with 10 gauge and the Traxxis fit nice http://www.rcpitstop.co.uk/traxxas-high-current-battery-connectors-2x-female-3080-375-p.asp

Ah... i forgot Xaircraft stuff to!

Well could do with a few more conformations but so far Droider Quadcopters RCPitstop Quattro Jake Bullet Wanyon Complanio Ben 123 Ovdt Zaxis Gunter Macsgrafs Possible Any More? Dave It WILL be a really good mindmelt.. IP in this game is hard to come by for free!.. apart from on...

On my ADX3 I power my superlights from the same CC bec that I use for my camera mount servos at 6.5 volts so I ordered the lights with a 6 volt resistor but I have no control over them.. they are just on all the time. On My ADX3HL I have used a separate hobbyking 6 volt bec via the extension...

Whats the thinking behind this Bart? Dave

Geoff at Quadcopters.co.uk tried it on a hexa.. think he could get 4 of the six motors spinning but gave up after a few hours of faffining.. In theory as Ken says it should be possible but if Geoff could not figure it out it aint going to be as straight forward as it sounds Dave

Oh eye.. from the new Gaui to the BIGGEST DW! + some flying examples of MK and DJI, FPV and some really sexy new......

Emo which flashing lights? the stobes or the fades? The bright ones, white, green and red are the super lights.. page 8, £5.75 each.. you need to specify either 4.9 or 6 volts for the resistor.

Hi Matt.. welcome the MRF.. You have a few MRF's down south so have a search round the site to find your nearest MR flying buddy.. There is a meet which may interest you upt north see this thread http://www.multirotorforums.com/showthread.php?959-UK-Europe-MRF-Community-Meet Post up...