Search results

Ah temps. Both the same little warm, maybe a little warmer with the Xoar caffe having this temp I would pour it away :) !

okay first results ! Fully loaded s800 z15 gh2 zippy 8000 mAh: 15 x 5 Xoar : 14 x 4.7 APC : APC flight was very short. First of all I forgot to switch on the telemetry to start logging and than i heard a noise i didn't like. Since i didn't have the little inlay with me for the APCs i...

http://www.sm-modellbau.de/shop/product_info.php?products_id=136 by the way love these small little telemetry setup. Really not expensive but only works with Hott Jeti, Multi. the bigger version has an sd card which i am using. To bad its all just in german ! Boris

The whole s800 zenmuse setup fully loaded over 5kg is flown illegal in Germany, probably most of the time :) I doubt that most pilots get their permits for take off.

The question is with which RX it will work. In Rcgroup there were some channels stated don't remember from whom, which don't for example work with ImmersionRC RX. Foxtech was stated a compatible ! Boris

so ready to test I hope tomorrow. What were these graupners people were discussing about ? Unilog installed so should get the needed data to compare flight time A draw etc. 15 x 5 Xoar 14 x 4 JXF and 14 4.7 APC

ah .... it no more copters tonite. Going for the tunnel/darkness, the ticket will be a couple china towns :)

They wouldn't even have to go as far as a mapping feature ( which would be nice though, but they would see it as a lot of work having to change Immersion tools for mapping channels ) just a Spektrum Naza PPM FW. It should also be in their interest considering the spectrum naza seems like a...

hmm but isn't isn't it just a question of the PPM interpretation between the Spetrum and the EzUhf TX ? Shoudlnt it be possible to just load a Skeptrum PPM FW on the Ezuhf TX ?

Think you are on the right track wit that ! Posted it with the Immersion guys, who claim there aren't any issues ! Lets see if they can do something from their side FW wise: http://fpvlab.com/forums/showthread.php?194-EzUHF-help-questions-topic&p=145295&viewfull=1#post145295 Boris

Ah okay I have the exact same problem ! Did you check the immersion forum ? Should I search or have you looked already ? Thanks

Trying to hook up my Naza to a Ch 8 its Ezuhf Immersion RX via PPM and for some reason the channel 1 to 4 a mixed up. Did one of you already try this. DId i miss some configuration were one can assign the channels ? Radio is a DX7s already binded to a different Ezuhf RX used in traditional mode...

i agree with jess futaba probably the best for WKM. Not because of the radios, but it seems to me that s-bus setups are the main test platforms for the new WKM firmwares. Than 7 channels might be enough now. But WKM already has more features that could be used if more than 7 channels would work...

The nice thing about the mount is that the screws that hold the mounts to the motors are elevated eating a little into the prop and creating enough friction so a good tight hold. But i will keep a close eye on it Lefebvre !

Would you guys worry doing this without a washer? The 14x4 have a little to much meat to fit an additional washer ! Fits perfect Boris

cool thanks those should do !. Nothing special just trying and thinking of different methods to get these s800 Arms stiff ! A rectangle tube will also do which they have in the right dimension. Trying to find a way to add as little possible weight and not kill the airflow completly...

don't know it gonna check it out ! Thanks !

Looking for a Carbon u Profile, one of you seen any in shops ? 1,3 cm, length i don't care about Thanks Boris

Did and they are already on their way to salzburg waiting for me :)

very nice ! just staying in vienna and not going on vacation because i am waiting for the mounts :)