Search results

Hi Jess, can't say yet was a little set back, had to send a board back because of some strange temps reading of the gyros and the mags didn't do what they should have. Than a new one was send to me which was great instead of waiting for a repair. Unluckily the shipment took 2.5 weeks this time...

http://download.dji-innovations.com/downloads/wkm/en/Wookong_M_product_release_notes_en.pdf What’s changed?  Attitude is controllable when one power output of Hexa-motor is failed in Atti. Mode and GPS Atti. Mode, including Hexa-rotor IY and Hexa-rotor Y.  When one power output of...

Hi Krsi, its really hard to say. Can be an issue with the IMU can be something with the can-bus communication. The best would be write a email to DJI support and ask if you should fly in this state. If you get a purple LED in none GPS mode than something is wrong ! Really ask them before you...

red i can't get involved in comparing the orbits to the tiger, since i never tested any orbits. Just wanted to state that the tiger sound awful ! Have a couple tiger or OEM version at my place and not matter 8khz or 16khz they don't sound that rough and squeaky. Could be that you really snatch a...

DCDK Stating a list of components and waiting for people to exchange components and comment on whats good or not will not work out for you. People give subjective (which is not meant in a bad way) answers which components are good but their judgement is on the single components and not how they...

Strage one i have the zenmuse hooked up to a spectrum receiver and I have a DX7s to control it. I had awkwardness once were thing should have been working but the gimbal didn't respond to the radio rebooted without changing anything and it worked. Try it again create a complete new model...

Looking good. Do you have any info on a Zenmuse mounting option ? Thanks Boris

hmmm actually thinking about the placing the herks under the center plate and using the cs8 damperns to isolate them from vibrations. SHould be a problem to have them that close to the Lipos ? I like the ideas since than i won't need a cage on top. Don't really care so much about the DJI...

Distribution not necessary anymore weight reduction. Beside the point of additional soldering, distribution to ESC etc. Less areas were there can be faults. In general weight reduction compared to equivalent ESCs: - With XL-Cooling plate 150x150mm : 300g - With L-Cooling plate 100x100mm : 240g...

sorry I was confused about the orbit numbers etc only know these which seem to be okay with 6s. http://shop.aerodron.ch/index.php/control/orbit-20-18-pro-serie-to-axi4120-20.html I wouldn't do it if they are not stated to be working with 6s !

Japp hook it up to the naza assistant get the Hardware SN send it to DJI. They might even be able to link it to the email address with which the first login was created and contact the owner directly over email ! Boris

Thanks Red !

John the axi Motors: AXI 2826/12 are good motors, but I would tend towards lower KV motors if you want to fly with 5s or better with 6s. But its a little hard to find the right motors for that. Concering the 70A ESCs you should really look for different ones ! You are packing on extra...

red if you find the time can you give me the dimensions length wide height of the little ribbon cable to servo boards that come along with the herk 3 Thank Boris

Cine check the vimeo Herkules channel. I think that's what mkthor is actually doing and tested Boris

The guys are flying with the DJI WKM Mixer X8 mixer which by default does not reduce or increase the rpm for the top or bottom props. I think though that they are flying slightly modified mixer in order to have one herkules board taking care of either the upper or lower props which would give...

Looking for a S800 Landing gear can be from a crash and damaged would need to see i photo before though. Thanks Boris

interesting, conclusion if you have a Gopro Hero 2 no need really to get a silver Hero 3

Waiting for the Herks III v2 I am starting to convert my CS8 to X4. Just hearing to many positive feedbacks about stability reduced size, redundancy etc. Eventually going to get help from someone specific to change the WKM mixer to have two quad running via one Herks III board to increase...

Japp that is the way the MK uses the Rsat or the MK version Rmk2. PPM in and Ext connected back the FC or sensor expander.