Search results

hmmm you can fit the landinggear plus zen in one of the peli cube and the s800 with arms off easily in another pelicase. http://www.peli.com/en/maletas-grandes-de-proteccion-0350.html But Sandor has a point price wise. Wont be cheap to go the peli vase path !

finished installation of the herks. Didn't use hot glue on the Elkos prefer Silicon hold better and give extra vibration dampening. The herks themselves are mounted to the CS8 vibration dampeners. Should additionally give some dampening to them ! Probably going to cover the soldering joints of...

Heinz wann gibt's die Sache zu kaufen? Ill translate once answered Lg Boris

thanks michi. I was mainly concerned if I have to bring the GND from the MC which i don't particular like since in my eyes its a GND loop. Having GND coming from the Flachbandkabel and from the MC. On the old Herks it was no problem to leave out the GND from the MC and this time it seems like it...

Quick one for those that already installed the Herks with a WKM system. Do i need to bring the GND from the PPM now or not ? Does the jumper need to be closed ? Asking because in the previous Herk version it was not a problem to not bring the GND from the WKM MC, PPM only would work. Now...

even better than modded arms, would be the info that dji is finally excepting this as an issue. I bet reseller are reporting back ? How far to a upgrade of the arms by DJI ? Boris

small changes conceding HV3: LEDs are on without PPM being connected. ESCs give a startup signal without ppm being connected. The ESC themselves will signalize that they are on and a motors is connected with a beep. Motor connected and PPM will result in the motors additionally signalizing the...

I can only think of it being an issue with one of the motors. Attitude and GPS mode are limit to a certain throttle output thus you motors and ESCs are not pushed to the max. In manual mode this is not the case. You have a spare motor to test it ?. Similar to other FCs also if one motors docent...

think I am going to mount it directly under the center plate, just a little close to he plate though. Nicely protected and close to the lipos which will be under it.

Herks arrived :) Munting them tomorrow. A little sad that they come assembled to the cooling plate and with the power cable and elkos already soldered actual like doing that. But I understand the troubles with the versions before hand who some delt with them and messed them up soldering wise...

Ah okay, sorry it was a misunderstanding the one you see above is a version i did in the CAD program and today i got the DWGs to a laser cuter and got the parts back 4 euro for all of it. I was being sarcastic about buying it somewhere were you get charged 20$ for it :) Here are the files for...

think its dual lock http://www.3m.com/product/information/Dual-Lock-Reclosable-Fastener.html Boris

done :) actually works nicely ready to fpv :) Boris Cant wait for something like this to show up in a shop for 20 $ :)

check his webpage. He will get back to you. http://andreasbaier.de/index.php/en/contact Boris

Guys any lens protection out yet for the Gopro 3, In any case just designing one since my Gopro 3 arrived. Gonna be a small 5mm piece. Easy cut out for anyone. Gonna put the files online once everything is right. All you need is the lens proctecion parts from the plastic case. Boris

Ill answer as much as possible time wise and what can be explained easily. Lipos 1) What you are interested in is what happens during flight. Don't want to get into the discussion how low lips can go etc. What you don't want is that even after flight the lipo is at 3.6 per cell you don't...

hmmm http://www.kickstarter.com/projects/puzzlebox/puzzlebox-orbit-brain-controlled-helicopter Should i back it ? Boris

Some of you asked me for the final prices: 4 Arms with all parts and Landinggear Alu its provided from me and with G10 Landinggear provided from the CNC guy: € 433.- a € 108,25 12 Arms with all parts and Landinggear Alu its provided from me and with G10 Landinggear provided from the CNC guy...

were is the manual some one got a linK ?

Okay parts are finished in the digital world. But they are going of to a CNC guy in the next days. KW 10 arrived And Herkules boards should be on its way soon Boris