Search results

nope double for a octo ! Boris

Hi, any pricing on this yet ? Thanks Boris

I am positive they will make a package. Why would one want to buy a S800 with a standard landing gear and additionally but the retracts.

HEX thanks, you already have one ? If so can you give an approx what the angle is of the slight V. Measured from a horizontal line up.

remember this pic from one of the fairs. The one in the video looks like raw Alu thus probably a prototype. Not sure in the pic of the landing gear is all the way up or not. Hmm maybe i should what before i waste 300 Euros on carbon parts that i can throw away if it snaps up higher. Boris

Ah great !

one of you have a clue if these retracts will be perfectly horizontal once up or will they go fourth like a V form. Just wanted to send off my parts for the CX8 X4 conversion and now I am getting scared the s800 landinggear good touch my lower props. IN die Video it looks like the end in a V...

Feeling wise i would say it works. I guess that ys-x6 works with the same ESCs as DJI does. To go sure though i would ask from YS-X6 for infos about how they communicate with the ESCs. Start pulse pulse range width what ever there is and check with Andreas. Up to now i only know of build with...

That was also my feeling back than when it test the apc and the xoar with your adapter. The xaor 15x5 just give it a much smoother and calmer feeling in the air ! Boris

Adding some dampens to the motors is a good approach. I have just seen to may attempts come and go. To get the right mixture of isolation vibrations but also keeping the stiffness for the motors, can't be a universal approach for all frames and different weight of setups, motors props etc. Lets...

new version will be reduce to only 2.4ghz and smaller than the old one. Magnetic back panel for the back just easier to adjust components etc.

jape must agree for a one man setup it could be very interesting ! Just to expensive for a quick test. But will be looking in to get more infos !

ah cool didn't know. Haven't seen any of barts builds lately. Same method on his XY setup or did he start with smaller birds ?

bruce you made me think and yes this is the better approach I think Normal motors mounting is possible and coax setup with these little mounting crosses that come along with the motors. Less weight and costs than producing own mooting plates. This should do it ! <dl class="file"...

And yes you are right about costing a fortune. I am just working to simplify the design to reduce costs.

Ah very cool, thanks bruce for researching on this !!! I have the QAV500 arms and 6061 will be more than suitable. Gonna order some sheets. Boris

hmm one of you a clue between these different Aluminum mixes ? AlCuMg1 AlMg3 AlMg4,5Mn AlZnMgCu1,5 Thanks Boris

getting there. Arms for signal motors and plates for a X configuration.

Hi Bruce i am sitting at it at the moment. First wanted to do the Arms in a traditional way without the coax mount option. I am just creating two plates that will allow to mount the motors to them and then sandwich in the standard arm. Will post later if my beta Rhino OSX version doesnt let me...

Gotta love to have a laser guy close to your house ! Couple more changes and good to produce the arms.