Search results

HI Jdmagoo, japp got them back and changed some stuff and getting new ones again. Changed the motors plates that they can take 19x16mm and 25x19mm (mounting) motors. And it needed some changes to the clamps etc. Will keep you guys posted once i have the final version !

slowly getting somewhere, now time to do the wiring and calibration of the ESC32 and the AQ FC. Still a long way to go:

Have a spektrum but modded with LRS system so never did the normal failsafe with it. But this should help and make it clear: Instead of creating a preset with the stick. Use your three position switch to create the desired preset. You will have to adjust your three position flight mode...

The Problem with such rants it that it doesn't help anybody ! Would be better to close this thread and comment on those that actually deal with a case and back it up with facts ! Boris

Important would have been to know the c rating of the lipo. But since its a f550 and your are running a 5800 mah which is a variable to the actual A that can be drawn, i dont believe its the lipo ! Considering that you always treated it well. Boris

Its simple, hook up your bird without props to the lipo and connect it to the assitant. Go to the tab were you see the RX sliders. Switch off you radio and see what happens to the sliders ! If the throttle goes to zero than you when the radio is off you more or less have your answer ! Boris

In this case it can be a failasfe issue. Having throttle set to zero in case of signal loss and you not setting the flight mode channel to go to failsafe if case of a signal loss ! Still it can also be the cables from the naza to you RX check those ! Cheers Brois

Lucab what RX are you using ? SBUS, single cable per channel or PPM ? Boris

To tell the truth i am not too sure that this wasn't a radio issue or the wiring to the RX ! Nothing like you guys mentioned rebooted the ESCs didnt and the NAZA didnt. If the Naza would have restarted it would have caused a crash, since arming of the copter would have been necessary again...

Hi Rene, Direct HDMI out to a device you also dont get any picture ? You can change the mode of output to P or I play with that, concerning the converter ! Which one do you have ? Boris

Hi jack will send you a pm later today. Thanks Boris

Ah and can you provide specs on size weight and a pic maybe to see how long the lead are. Would be interested but don't need the EC5

Jack why are you selling them ? Do you have an invoice to them ? Thanks Boris

Hi Iris, I will not be selling them ! Just gonna supply the STLs over shapeways and components from shapeways are not competative anyways since they are expensive ! Its designed now for 16mm tubes. I personally like those the best, 1.5mm thick very nice finish ...

Thanks Chris ! Yes that was also my thought to have the option of mounting coxial , with an additional LG mounted to the boom. I just noticed that I forgot about the ESCs and that in most Disco cases they will be mounted on the arms. Have to think of something there that is stays clean ! Boris

Also ordered one. Just not to happy to have to deal with the DJI arms again especially because i would like to knock the motors up to 2814/22 axis for example: So i started sketching these parts ! Should allow to have standard 16mm booms attached to the tbs frame or any DJI frame. Any thoughts...

I am on the same page with Pete on this one. Having been through a AV 130 AV 200 and what it means to get spares or even reach someone from PH, I would wait to see how things develop ! Eventually i dont even agree with their designs at all anymore knowing a little more about cameras mounts than...

DJI Naza ist more than enough for a CX, only if waypoint is a must than you would have to go with WKM. But not sure what DJI has in mind with the Naza V2 since addtional modules can be added easily now via can-bus

Out of all my birds i fly the cx4 most ! I had to mod it a little from the first version, change the gps position and didnt like the orignal lipo position. Wanted it to the back to balance out the whole copter having the gimbal as counter weight !. But in the meantime the cx4 gives my the most...

chpag this shoudl help: http://bmpcc.rubenkremer.nl Boris