Search results

Hi, If you are not under time pressure I would step back from the CS 360 gimbal with MK stab and wait what else comes out in the next 1 to 2 months concerning brushless gimbals !!!! Servo driven gimbals are just the past and if they are capable with whatever stabi to actually stay level they...

finally have the parts and already know what could have been done better :)

sorry smp didnt catch you post shapeways is a 3d printing plattform. Lets you upload your design and share the files or open a shop and sell your design which they than print out ! Assembled and roll and tilt are working. Cant install pan since didnt get the secong board yet. Little issues...

HI Heinz, i will anser it here ! I never have constant gains for pitch roll and yaw. I always have them on one of the Xs. Start them on 140 for all three and adjust them on the fly to what ever feels right. Conditions are always different thus i want to be able to adjust the gains !. Vertical...

Hi Bernie, as far as i can remember you can update the IOSD V1 and get the loggin going. The IOSD V1 also has a built in SD card and can be connected to the IOSD assistant and put into the SD card mode, thus data tele data is accessable and display by the log viewer !. Hmm if you say mounting...

Bernie I can only imagine three things going wrong concerning the height drop ! 1. Way to low vertical gains but I am pretty sure you considered that ! 2. To many vibrations hitting the IMU thus issues with the z axis ACC resulting in either drops or climbs. 3. Either your baro sensor has an...

Beja sorry for not being available is all working in the mean time ? I couldn't have helped you with the tele board to jeti though still have to order mine ! Boris

japp for now the iflight 5206 tilt and the 5208 for roll and pan. Second version http://ahm-rc.de/gimbal-brushlessgimbal/738-be-4114-bgm-brushless-gimbal-motor.html: Red parts are just areas i have to revise since faulty:

Sorry for the late reply Supermagico ! I had a little issue with the UltraESC waited for a replacement. Now all good will try to get them tested this week ! There is no throttle calibration for the Ultra ESCs you can set the range in the assistant tool for them. I think if i remember...

Gettiing there probably tomorrow i can give it a dry run ! Little big the way I choose the carbon tubes, but want to be able to test a wide range of cams !

SMP for a heavy lift, DJI WKM or Mikrokopter based for sure Herkules III ! Boris

I am starting to think that the startup voltage of the ESCs is to low for you motor propeller setup. I just had a similar situation with some ESC32s. Without the props on the motors started without any problems with the 14 inch tigers they were either not starting up or stuttering. With the...

Ill push this question one more time in the rcgroups thread not that i dont believe your research !!! I just want to hear it from one of the guys that know or wrote the code! I guess when you mean manufacturer you mean the producer of the IMU/accelerometers ? The question stays though how...