Search results

  1. BorisS

    Failsafe, Connection oss S-bus PPM PWM

    I am wondering and didn't test it yet what actually happen when the MC looses the connection to the S.bus receiver ( for example the signal cable just gets loose and there is no more contact ) Compared to that what happens if the MC is connoted to a traditional PWN Receiver and the throttle...
  2. BorisS

    Groud-Station Build 2.4Ghz and 5.8Ghz

    It came to the point that i am sick of carrying this and that around for the FPVing and for the Bigger copters to get a feed down. Since i am dealing with 2.4 ghz for the small fpv birds and 5.8 for the bigger DSLR bird i thought it was time to create a box and Stick everything inside with one...
  3. BorisS

    It just bit me :) Learned again to take the props off !

    Just wanted to upgrade my Naza in a late night session thought i would leave the props on and during upgrade the Quad went to full throttle cutting up my arm top of my head luckily nothing in my face :) But this was pure luck it could have landing completely in my face and that would have been...
  4. BorisS

    Whats the Risk of combining 2.4ghz Futaba and 2.4ghz VTX

    Without thinking i started putting some 2.4Ghz VTX OSD stuff on my CX4. Thinking great already have a finished 2.4ghz groundstation etc. Now in several FPV blogs forums that combo is pointed out to cause issue. I would like to try it anyways since i am quite safe with WKM failsafe. Just if...
  5. BorisS

    Data-Link with MacBook

    Hi has one of you successfully used the data link on a MacBook ? I am constant getting USB errors that the device is draining too much power. Boris
  6. BorisS

    Any guesses what causing the shattering noise Motors or ESCs.

    Hi, was flying today with my FPV quad quite strong wind and eventually the back left motor prop esc combo started making strange noises and loosing rpm. My guess is its the esc would be the second simony flashed ecs going bad in a month ;(. Don't want to risk flying like this but also don't...
  7. BorisS

    One of you tried these yet ! Sony CX 730

    Was just reading a thread in the MK Forum, of a guy doing some shots with the Sony CX 730, this gyro stabilized lens setup seems to work quite good. Results from the Pilot/ Boris
  8. BorisS

    OSD gone bad ?

    Hi guys, like mentioned in the video the setup was working flawlessly already with a Lawmate 2.4ghz 1000mw TX change to a 500mw version and since than, everytime i switch on the Gopro and the actually video signal reaches the OSD I get interferences. Without the Cam connect or switched on the...
  9. BorisS

    Fotos from NAB

    The only one i could get from a friend :)
  10. BorisS

    Wanted 2.4ghz 500mw or 1000mw Lawmate VTX

    Hi Guys, looking for a Lawmate 2.4ghz 500mw or 1000mw VTX, preferably in Europe vendor or private. Already have one coming from the stated but going to take a week or two and i need it fast. Thanks Boris
  11. BorisS

    Naza on a HT FPV frame. Descends during yaw randomly

    Hi Guys, didnt have a Naza up to now only had my WKM setups. Just trying it out and trying to see what i like more CC or Naza. Naza is working like a charm the only thing that is strange and this only happens randomly is that my bird descends on yaws. Its so random i cant pin point it. Gains...
  12. BorisS

    Maxamps 11000 mAh 4s 820g

    Hi, did a couple test with the maxamp 11Ah lipo and up to now i am not dissapointed: The 820 g to beginn with are true: next to a 5000 mAh 5s nano-tecg lipo and a 6s 8000 mAh zippy Initial charge from 3.8* something per volt, getting in another 4000 mAh, Discharge at 1.2 A, Windows...
  13. BorisS

    Tripod Screw or just the thread and a plastic Washer

    Hi guys, wanted to order this from the US, but shipping 30 dollars for a 7 dollar product it just to much http://www.quadrocopter.com/CineStar-Tripod-Screw_p_520.html anybody know were i can get those in europe or similar parts, google is not treating me to well and cant find anything...
  14. BorisS

    FPV setup, Do these components make sense ?

    Hi, I want to order these components. I am especially not sure about the Antenna if they make sense. Can one of you comment if this setup would work. **** 1.2GHz Lawmate 8Ch Wireless A/V Receiver UPGRADED SAW FILTER**** $79.99 $159.98 **** 1.2GHz 1000mW 8Ch Wireless A/V...
  15. BorisS

    Interesting approach with the WKM as FC

    stumbled over this in RCgroups: http://vimeo.com/37693689 http://vimeo.com/37689230 Boris
  16. BorisS

    What Props do we need ? 14 x 4 light weight Carbon ?

    Hi Guys, since there are not to many prop sizes pitch etc options out there and mainly a problem for HL configs, since the bigger props are very heavy XOAR etc comparing to CF 12 3.8 porps out there with 11 grams. I wanted to ask addressing the HL pilots what prop size pitch size based on a...
  17. BorisS

    Mercalli 2.0 Settings

    Hi wanted to ask if one of you is using Mercalli to stabilize footage. Haven't really gotten into post stabi programs yet and now trying around i have the feeling that they make things worse in the sense of adding movement that looks like vibrations. Any recommendation which post software/plugin...
  18. BorisS

    Getting bored :) Anything upcoming on the MR horizon ?

    Hi guys, okay so we have the DJI gimbal coming and frame that has to prove itself if as good as advertised. There will be some developments concerning Openpilot and their new FC and ESCs. We have DIY Drones coming with APM 2 purple all in one solution. Anything else coming up that has to be...
  19. BorisS

    How promising is OM-D E-M5 five-axis sensor-shift image stabilization ?

    Just stumbled across this : Anybody know anything more about it and if its worth to consider once available ? http://www.engadget.com/2012/02/08/olympus-om-d-e-m5-five-axis-sensor-shift-image-stabilization-han/ direct link video: http://www.viddler.com/v/1a4cefde Boris
  20. BorisS

    Wanted CopterControl Board

    Hi, since i blew mine today and not knowing what happend i am looking for a CC board. If anybody has a spare i would be very happy. Boris
Top