Search results

I tried that a couple of years ago with an MK board and the verdict was that it was not as good because it screwed with the yaw in high winds. I expect that the DJI algorithm is better.

Well spotted Ken The other clone mr's from RC Timer are definitely knock off and not out of the same mold. It does however suggest that DJI don't actually make the stuff themselves. I mean you cant just make those motors in a couple of weeks or produce the ESC's. It would seem that RC timer...

That looks nice, but doesn't the Zenmuse fit in that position?

I doubt that you would see much benefit in choosing high C rated 6s batteries such as those used on 3 D helis. 420 usd for a DJI battery does seem a little steep.

I was a little surprised to find that the S800 U/C stays don't fit correctly. For them to sit without causing a few stress raisers they need to attach at compound angles however they are drilled at 90 deg. I checked with dji and they are saying that a mod is coming. Ball joints would also do...

Why not get the Datalink and use a PC with a high end game controller, use a spare radio for the camera operator.

Nice rotation, what's the gimbal?

So what is the best battery choice?

It will not be the motors torque that suppress the vibration. it comes from the balance which is floating within the magnetic field inside the motors. Without the perfect balance it would not work properly.

With so much high end stuff out there now, this is a place to show the lower end of the camera market results. I was shooting some clip ideas for the upcoming latest North Cyprus production that will be shot with the Zemuse/S800 and guess what I got attacked by birds. I was not sure if the...

Yes I am having two complete packages, one is for a customer.

Mine just cleared customs here in Cyp. feel free to check it out.

I was buzzed for a few mins today by about 10 big black birds, not sure what they are called but BIG. They were trying to drive the MR away from their patch in the Harbor. They got very close. I have full blade protection so they could have a hard time bringing it down but not impossible for them.

Looks great value for that kind of money

I don't use any stabilised lenses these days just good camera mounts with integrated MPU6000. Basically a ArduIMU with my own code. Currently using Canon 550D plus GpPro HERO2. I have a nex-7 which is for a customer who is using the 16mm. The Canon uses a standard 50mm lens. The Panasonics that...

It's DJI's version of carefree

One of the problems with image stabilization systems inside of the lens is that of recognizing movements which are intentional and those which are not, for example, if you are making a slow pan movement then the lens will hang onto the first position and then let go of it, resulting in jump or...

The SimonK firmware will not yet work with 14 pole motors but a fix is on the way.....:tennis:

Have you tried this simple solution. Just lower the throttle trim after programming.

I got out early again before the wind got up to test another servo driven gimbal. This time the other half went for a dip in the hotel semen pond before I breezed down to the Guaba Beach Bar. Only the second time I have used a GoPro but I am starting to like it. If GoPro get their act together...