Search results

Admittedly I'm not throwing my HFP boards around but I am flipping / high speed screaming around my disposable KK2 1.5Kg quad. 1) One thing worth noting is that you need to keep reduced power on when inverted / diving (I use about 1/3) or you have no directional control. That can get...

...and a borrowed machine! Pete

Congrats :) Blowing so much here today that I didn't risk mine. What is your flying weight? Cheers, Pete

It is a standard option... 310 or 355 for a few more $. When they first built the new website (when we ordered ours), not all options were shown. Prop choice - My mate with me yesterday (Stacky) had his diy hexa and it was the same size as mine with the same motors and FC - just 400g more...

VM-6 with 355mm arms - modified for X6 configuration. Hoverfly Pro controller. Sunnysky 2814/11 Motors Plush 40A esc's 11x4.7SF APC or 10.5x6(narrow-blade) for windy conditions. Pete

Unstabilized on-board and ground video of the first field tests of my my new Droidworx VM-6. Dark, overcast conditions are not good for video... or the 20-30Km winds but I need to know what conditions the machine will fly safely in. The 11x4.7SF (wide-blade) props were swapped for...

That does look very nice :)

Awesome! I had mine out at the field today. I am still working on the mount so I just flew the gopro (+ 500g sand-bag) in +30Kph winds. Just awesome! Pete

I was lucky to have my fingers crawl over one at the factory. Linda showed how the mounts come off for easy camera access (similar to the XM system). Very nice. Pete

Good luck Nick. I'm sure it will rock :) Pete

Hero2 on 1080P Medium fov.

Proof it flies above 6" Gopro taped on only to the top of the u/c arch... crooked ;) First flight in any wind - 10mph and it flew beautifully. I treat it well (as though it always has a camera on it) and it should keep flying like this. The wind will be up over the next few days so time to...

I'm at work so this is as good at it gets. I can do a proper shoot on at once home in 4 hours time... I didn't order the cage... I don't crash! (no you can NEVER quote that back to me).

After a crash, I have had the the aerial connector on the tx break solder / come loose... where I had to take it apart and resolder. Just something to look at... Pete

Looks awesome mate. Great job :) The quick-release system looked great when I had a play with one at DW...

The interest wont last - grab it while you can! My daughter wanted a multi-coloured quad... so I bought all the bits, then turned 14 and found the male species... and facebook and twitter... :( Pete

Posted at 4:21am!!! Dedication mate! It looks awesome. I look forward to the flight review ;) 26 minutes on mine now and no scratches. The wind will get up over the next few days so I get to really test it ;) Pete

A workout at dusk with fff with climbing and descending. 4S5000 pack and 8 minutes. I happily had it to 200' but the descents required care not to come down too fast. Some adjusting the gain was needed. Some good fast fig-8s - it rocked while maintaining height or climbing. I will change to...

Flight test time in perfect weather conditions after work. Motors: Sunnysky 2814/11 700Kv 120g. Props: APC 11x4.7SF 16 minutes logged. 1st flight was the gain + AL setting flight for the HoverflyPro board. Many climb and descents, AL (auto-level) and AH (altitude-hold) were tested / changed...

Nick... what motors / power / prop setup are you looking at? Pete