Search results

Your clearly ripping other videos and passing off as your own.. Read your very own site. "Just click on video clips link below, and you can see OUR ACTUAL craft showing off all its cool accessories" That just sucks big time , Dronefilmer from Ireland did similar using Jeff's from...

What is the weight of the bare frame ? Without gimbal .

It will be most likely , motors connected to wrong port .. I have done this myself on a few occasions and it is a very common mistake even when double checking .. So now I triple check :) Failing that it could be a channel mixed round like Ail or Elev swapped or a channel needs reversing ...

Nice well put together video there , and the Graupner telemetry looks great tons of info . Geoff

I would also agree the COG settings are very critical for good gps holding , I have experimented a lot with COG settings and it does make a difference . And vertical gains does seem high , I have never had to go that high on vertical or Yaw so might be worth setting the Vertical on a dial on...

Hi Lec I run on Cloverleaf and Skew planer and its awesome , much better than the omni . I have not yet tried a patch Receiver with a cloverleaf Tx so cant comment on how they work .. But if anyone knows let me know :)

Yes it is a very well balanced machine , Im getting to like the Y6 configuration more and more I fly it ..

Yes the landing when reveresed was LOS because it is very tight coming into the garden with all the trees here etc . And props are only visible because the gopro was hard mounted , if a gimbal would have been used then props would not be seen . Geoff

A Early Morning FPV flight with the Wookong M on a Droidworx Y6 Frame . Raw video shot on the gopro 2 (hard mounted ) at 720 60fps , no post stabilisation or camera gimbal used. Please excuse my trainers in the garden , Our new puppy keeps taking them :)

Also hoping for improvement on compass errors are magnet errors which seem so often on the 0.86d firmware .

Off topic section would be good I think , I guess you could always trial it and see if it stays friendly :) Geoff

The build seemed a logical thing to do :) did you set the escs to 16hz and High timing rather than automatic ?? also start up soft as the Maytech seem to be fast on initial spool up . I am flying most things with Maytechs and loving them . Have fun learning to fly Andy ,, but with Lec...

Have you been issued a serial no upgrade for the WKM view ?? Geoff http://quadcopters.co.uk

double check in assistant software that the flight modes are moving from Manual Atti Gps and all lighting blue in the software . That is normally cause of being unable to calibrate compass . But you have already a few flights under your belt with this machine so you must have calibrated it...

Glad your all sorted , Esc wiring wrong is a popular one and when there tucked away its a easy mistake to make ... I know done it myself lol. Least your airbourne now so enjoy it :) Geoff

Alex would you be able to have a drive to my place so I can have a look at things for you ? Might be something and nothing but at least if I get to look at it then hopefully we can get you airbourne . 200 for Yaw sounds high to me personally , I am normally at around 120 for most my builds on...

Meme , 3 lights flash green and then 1 red means it as just defined home lock , and 1 red will mean it is on the way to finding satellites . Alex your vertical gain sounds high , try about 120 ish . Geoff

We have the 5000mah 4s Turnigy and Zippy in stock. http://quadcopters.co.uk/lipo-batterys-61-c.asp Geoff

It will depend on where in the Globe you are , but if your in the Uk or Europe my company http://quadcopters.co.uk will be happy to serve you and all F550 are in stock with same day dispatch if ordered before 4pm . Geoff

Point the Naza controller facing forward m1, m2 , m3 etc facing the forward direction , Looks like it is pointing on a funny angle on the video . If you watch when you take off it is going off at about 11 oclock direction . (Thats the problem ) Geoff Quadcopters Uk.