Search results

It looks like Droidworx Aeronavics have some very nice Multirotor Frames coming soon , they seem to have been very busy with new developments so cant wait to see there latest offerings when there released. Quadcopters Uk

When you set up the failsafe it seems by the symptoms described that you did not set the Throttle failsafe value at over 10% throttle . You need to make sure in assistant software before flight that when testing failsafe , the throttle moves over to the right at least 10% and also the flight...

I would also suggest trying a 2s Lipo if you are finding throttle very lively . Running a 2s Lipo will really tame the Gaui 330x-s , Also as others suggest check there is at least 30% expo in both elevator and Aileron for beginner set up. And make sure the GU-344 is in red mode (cruise) Hover...

Hi Pete , glad to welcome you here .. There are a lot of knowledgeable members on here that are very friendly and helpful so any questions just ask away . Geoff - Quadcopters Uk

I dont also like the Idea of thread hijacking or even sending Pm's when the original topic is for another Vendor , Sorry but thats just my view and not wanting to upset anybody here. As for Quadrocopter.us which this thread was originally about , you only need to see the videos they produce to...

DJI Wookong M - Failsafe set up for DX8 with the AR8000 and TM1000 When setting up the failsafe you bind everything as normal first , then set up on the TX screen in Wookong Assistant for failsafe so adjust travel on throttle so it goes over 10% and adjust whatever channel you have assigned...

120 120 130 125 - atti gains at 110 running 4s with 10x5 graupners on axi 2217/20 Geoff

Rob sometimes posts are easily missed and some of the members on the site that could help are not going to be on 24/7 so a post could vanish from first page. I must confess I dont go deeper than first page when browsing this forum . But as others said , good on you for helping him out and glad...

Yes as ED says put 3 way switch in middle first then sub trim it so it highlights Atti , then move switch to top position and then adjust with Travel adjust or EPA to light up Manual or Gps Atti ... Then do same for bottom Position. You will need to use both sub trim and End point Adjust to get...

Calibration of the compass wont affect motors starting up . Have you checked all TX controls are going the right way ? and carried out the Tx calibration ? Throttle should go from Far left to Far right on the TX screen . Rudder when push right on the stick should move from center to right ...

Managed to get out for a few flights today with the new firmware on the Hexa 2 set up . First impressions .. a big improvement over last firmware and compass errors and magnet errors that were present are no longer and this is same set up . Height hold in Vario .. Much much better than before...

Hi Steve , You wont go far wrong with a F450 Kit for a starter quad , the frames are really good and they fly superb for the money . I am normally around so if you need any help or advice let me know . Geoff http://quadcopters.co.uk

My 95MB/s card arrived today at a whopping cost of over £140.00 and on 720p 50fps even this card cannot keep up with the hack . It hangs and crashes with the message "Motion recording was cancelled due to the limitation of the writing speed of the card" Am I doing something wrong with the...

This sounds like a firewall issue with your Home pc's or the way your network is configured. I am on Both Virgin media and Sky broadband which is BT and no problem on either . Also I have registered many WKM's and Nazas from here and only once had a problem which was the DJI server . I would...

Hi Boris , I have just ordered a Sandisk Extreme pro 64gig card because I have other class 10 cards that simply cannot cope , The Sandisk can handle 94mb/s .. There not cheap though .. @ Jeff did you manage to record at 88mb or do you just prefer 720 60 @44mb Geoff

Yes you have to demonstrate the failsafe but your flight test wont be till a good few weeks after the ground school course. You can fly round in any mode you like , you just have to demonstrate you can operate the machine in a safe and controlled manner and adhere to your operations manual.

I agree nothing to worry about , I briefed you what to expect when you purchased the components from me but Andre will make sure you are fully aware of whats needed to get the pass . Take notes when your in class , this will help . Geoff

They are almost identical to the Rc Carbon frames made by Sergey .

The Videos look very impressive so far and cant wait to try one out for myself . Well done guys..

I have done 500 Meters without problem with the Dx6i and DX8 . Im sure others have probably gone further without problems but always carry out a range test .