Search results

I have the WKM setup and configured, everything is working fine. (Futaba 10CG and R6303SB) I'm trying to add the RCShutter trigger function for the Sony NEX but can't determine where to plug-in and assign whichever switch. I'm using S-Bus, 3-way switch for Control Mode and dial assigned for...

Anyone looking for (6x) AXi 2217/20 Droidworx Edition motors? I have 4 that came off my TBS Discovery and two that are brand spank' n new, for spares. The wires on the 4 are shortened while the other 2 are left alone, all of which are braided. They're in perfect shape with little use (since...

Shop.ca has still has them individually or as a two pack

What size 4S battery's are your going to be matching up with the AXi 2814/22 motors? I have the same motors in a small Hex config. Debating on whether or not to use one big 11,000mah or two smaller 4S's.

Have a quick read here Flip it over so the heat-sink is exposed, other than that I've read that it's fine. Doesn't seem right though does it. When I had it running from 12v on my TBS discovery, it doesn't get hot. When I had it running from my 4S flight battery on a different fame, it was...

I'm in the same boat as you, trying to decide on which ones to purchase. I noticed you said you didn't need an Rx so I'm guessing you're using either a Uno or Duo that you already have? I was recommended the Aviator Base because of the more comfortable fit and 46 deg FOV.

I was planning on wiring in the EzOSD into the Droidworx Power distribution Board. I'll also be wiring in a Zenmuse H3-D2 along with two UBEC's for 12v (camera) 5v (Freefly HDMI converter) Basically the EzOSD giving me a total current draw and battery level of everything onboard. Does anyone...

Boscam are ok, but I eventually switched over to ImmersionRC. For under $100 it's worth getting to see if you want to get into it deaper and spend some more $$$. Boscam 5.8Ghz 200mw AV Tx/Rx Boscam 5.8Ghz Circular Polarized Antennas

I'd upgrade the motors, if not the TBS ones, something like these from FoxTechFPV They seem to have decent prices, although I've gotten dinged by customs from them the past two orders.

Any reason why you would rather purchase from Quadcopters over TBS directly? The price listed at Quadcopters for that ARFT is about about $300US give or take a few dollars. I'd piece the system together and purchase the TBS 900kv and ESC set they offer ... link here If your looking to have...

Here's a good link on FPV that should help you learn more about it.

If your going to be flying over water, I'd recommend a few of these Waterbuoy devices strapped to your rig. Regarding the parts that can be salvaged: As long as you give them time to dry out (maybe in a bag of rice) you might be able to get away with just the ESC's being the only parts damaged...

yes, big time. Central Newfoundland, normally around the coast. It was really hot out that day, and it was very humid, but the wind was up. I can't get the sound to happen again here today. But it was cooled off this evening when I tied. I'll have to keep an eye out.

I do have two new spare motors. take it for a quick hop and see if I can hear which one its coming from. Strange though as I didn't hear it the last three flights since that video.

I use one of these LiPo alarms from hobby king and fly los, sorry, don't use the telemetry wit the DX8, switched now to Futaba, but never used it when I was using the DX8. Sorry.

Where to in Canada eh?

About 15 seconds in, you hear a strange rattle noise coming from the motors or props .... It's gone now, so I'm guessing wind ... but def sounds strange. Half way through my fpv camera lens comes lose and falls to the ground, about 2 feet away from the water. Another good reason for LOS and...

I was watching a recent video from my gp3 and I heard an abnormal sound. It's always windy here so I take it out every now and then when the wind is really high, and just pop it up and down next to a wide open river to see how it reacts. Really get some gusts of wind. You never know, might be in...

What are people doing these days for testing a potential faulty motor or ESC, or any preventive maintenance for that fact? I've always kept that topic in the back of my mind reading through these forums. Came across a few, but to pin point and add a definite item as a checklist, I wouldn't...

Shipping is usually pretty good, I'm in Newfoundland, Canada. Once your in contact, tomorrow for sure I'd say, it shouldn't be long on shipping. I normally pay for the faster shipping though.