Search results

i just updated the firmware on the computer and it solved it. was several updates behind!

I updated everything and now it's having a hard time connecting. Says searching com port 14 and it goes down to 2. It connected once for about 10 seconds and then program became unresponsive. I rebooted, updated the firmware for recognizing the USB . Everything worked perfectly before . I'm...

haha i already thought of that, and then i googled radio jammers to not let it take off and that was a bad idea! prison time and fines. yikes...

yeah thats what im thinking , stopping where im at. ive made a pretty big deal so far on facebook wall and had SEVERAL shares from the post. Im at a wedding that day so im going to throw a cuple buddies 20 bucks each to film few mintues of flying and the other film a minute or two of the guy. or...

any thoughts?

So a couple days ago I heard through some friends that in a couple weeks during a upcoming very popular festival there will be a man with some sort of rc helicopter to drop ping pong balls filled with prizes over a possible crowd of people being 500 to 3000. I immediately did some digging, and...

this is a suction cup mount zip tied to the bottom of my hexa I dont even balance my props from apc, i second good motors im using tmotor 2814 770kv gopro 2

now when i try to connect to the setup utility it says"searching COM10 " and then the program becomes unresponsive and requires a shut down!

so im terrible with all the technical things with this hobby, i have only been doing it for two years. so i bought these http://www.hobbyking.com/hobbyking/store/__19611__NTM_Prop_Drive_28_36_750KV_265W.html thinking theyd be little less powerfull than my tmotors 2814 770kv they...

a short for a local land trust I just did

Three battery packs+one subject+short sunset= pretty neat

apc 11x4.5 i also have the carbon reinforced props as well.

ok i tried everything retraced wires went in to the dx8 for a hour to see if something was mixing etc?? googled and read on zen desk , decided to reflash firmware and it worked! flew two battery pack through it and noticed escs are getting pretty hot to the touch, ill pick up a infrared thermo...

very strange here, it seems to be in the radio becasue when i hook it up to the other radio it doesnt yaw it flips or sometimes it flies amazing.. i truly do not understand

so weird i serioulsy had the best results that one night it flew amazingggg!

the hoverfly zendesk is down or something i cannot repost in my ticket?

ok so i received my dx8 back from horizon hobby and they did in fact replace the gimbals? anyway whatever they did seemed to have brought the channels back to zero.. any way put up the bird today and it will fly but rudder to the right? heres a flick thank you Chris

i had this exact problem with my rig. check the monitor screen in the dx8 i have channels not returning to zero=bad potentiometer? mine is fixed now and is shipping back as we speak.

I dont know what is going with mine, i used a walkera 2801 pro tx /rx and it worked part of the time time and then when i placed foam like i told you it seemed to not flip. night time flights were amazing. and then of course when i went to film a video showing what was going on it WOULD not...

Zenmuse 3-axis gimbal $3,470= too much money! who and what are you targeting? professionals? well there only a handfull of those! drop it down and get the wannabe's and the fpv'ers.