Search results

470kv 14x5.5

http://investor.raytheon.com/phoenix.zhtml?c=84193&p=irol-newsArticle_print&ID=1831097&highlight=

That's my biggest gripe with the SuperX, manual is terrible. Leaves us to figure all this out.

Thanks Mike.

I'm really just glad you got it working:)

John, To my knowledge they were using T-motor carbons.

Like i said they are happy to answer "any of your questions" regardless if it's there esc's or someone else's. Seeing that I ordered a set of the new KDE motors, they recommend Castle and that's all i have seen anyone doing pro flying using.

I was referring to the email dhardjono received as far as the GB power goes.

On my Alexmos 3 axis gimbal you clip the + wire for pitch and roll!

Yes, that bec will work.

Moto, Give castle a call for yourself, they are more then happy to help you even if you haven't purchased from them yet. They have a first class tech support! 913 390-6939

Here's another explanation

I'm going to ask castle today to chime in, that's not how "I" understrand it.

Moto, 1 of the three of my castle's esc's has a built in bec, the other three dont. All I did was tie the 4 positive wires together only. Ground and signal coming from m1-m4. Castle has since changed the way you can get them now with or without bec's since i purchased my quad.

I just put a meter on the GB +pin and there is 5 volts! m1-m8 no voltage on +pins. It never occurred to me that there would be 5 volts on GB + pin, but there is!

The gimbal ground pin is common with all the motor output ground pins:)

Another thing that ken said, doesn't make since also. Where is the esc supposed to get the 5 volts it needs to run the logic chip if your connected to 22.1 volt batt. No bec on the package is misleading, because there has to be either a linear on switching power supply "or" 5 volts from receiver...

Moto, One thing i don't get is why you guy's keep calabrating your esc's over again. I did mine only ONE time, each one on receiver ch3 -100 to +100 that's it nada, never again.

:rolleyes:

Moto, Check out this thread http://www.rcgroups.com/forums/showthread.php?t=774420