Search results

When it comes to safety, quality, and accuracy of charge, there is no better chargers then ICharger and Cellpro.

Consider getting this one. Only 52 grams heavier then your 5300, nice increase in flight time. I just recently purchased one and it has very well balanced cells. Only 10 cycles, with a pack IR of 3. http://www.getfpv.com/tattu-7000mah-4s-25c-lipo-battery.html

That's why I suggested the Unisen-E, knowing it works with both futaba and frsky and a few others. It's really not that expensive for what you get. And in combo with the lipo sensor, still less then an osd and your getting brushless motor rpm, altimeter, vario, watts, volts, amps, and MAH. I...

Your going to need both. iOSD is only going to give you voltage. You can also just run a simple current/voltage sensor. I fly with SuperX osd, Unisens-E, and Frsky lipo sensor with multiple alarms. With my current setup I always reach 80% mark way before I get anywhere near 3.6v. At 5800 mah...

The lead free solder is garbage. Hope you don't find out the hard way.:)

Why lead free?

Andre, Looking at your photos again. Are you plugging the motors into the SuperX based on the labels on your arms?

Motor alignment/angle.

You took two steps forward and three steps back. Motor alignment in you first log you posted was almost perfect. Now you have a 20% spread on the 11 min flight. I overlooked the the voltage in your earlier logs. But you only want to power the SuperX off the flight lipo only. It already has a...

In your photo FC appears to not be pointing perfectly straight. May just be the photo.:)

Much better! Somehow I erased my last post. If you missed it. Take your finger under each motor prop shaft on each arm and do the same on each opposite motor to better determine balance.

The GPS would be better between the FC and IO.

What?? How were you powering it before?

I suspect the hex is creating the roll, not the FC.

Depends on how you bind the receiver. If it's working, I would leave it alone.

You really need to have a current sensor, and be able to know MAH consumed. I use one of these:http://translate.google.com/translate?hl=en&sl=de&u=http://www.sm-modellbau.de/shop/index.php%3FcPath%3D18&prev=search

Andre, Only thing i can think of. Is it possible you selected Hexa + instead of Hexa X in the SuperX GUI?

Regular flash bulb old style strobes yes. Led strobes no.

Check out Flytron Strobons.

Nope