Search results

Bearings, I am in the midst of thinking the 3515 mt series bearings may not be the right fit for the motor. I have a hex I made and purchase 6 motors for. Since the original purchase less then a year ago and not a ton of flying time. I have had take three of the motor out of service mainly...

Looking at the two different motor of the 4014 and 4012 options I would look at it this way, weight and horse power, if you are going to have a fairly light medium weight otco, then I would go with the 4012 if you think there is going to be a lot of weight, like 16lbs take off weight I would...

So here's some thing I would like to throw this out there. Just to put in the minds that we are all wondering about. Over all this is what we are dealing with the FAA categorization of UAV, many elements in are very ambiguous and it leaves large margins for interpretation. this is from the FAA...

7. Flying within 3 statute miles of an active airport is prohibited. Batman - I am familiar with you knowledge in this area, so I am not challenging it. I think and know in the original advisory (the one the FAA put out in like 1981) they were OK with flight with in 3mi distance if the tower is...

Right back at you Bart At the same time I like to say thank you for taking the time and efforts in putting this site together, For my self it as been a extremely valuable for my growth - I am not sure if I call it that but all the help in information I have obtained. Along with you I would...

This is some video from a steeple chase race, the idea was that there was a corner of the track where the judges could not see clearly. As a test for thought, The copter was lofted about 50 ft and sat while the horses came down the track. When done there was a flight made on the infield of the...

6 Tiger 3515 mt 400kv motors for sale, full set for $250.00. All motors are good 5 of them are tight and have no issues. The 6th is fine and I am using it. Although there is nothing really wrong with it and I fly the copter I can feel a littlest play in the motors itself, its been like this for...

Originally I posted this up on the "show us what you filmed" section but its not really about what was filmed. It is more about the concept of the result with the sony nightshot being activated in a dark time of night. How well it worked in letting people see so it could stir up thought for...

Multirotor Octo with night shot activated. I just wanted to test and see how it did, when returning home and landing. I only guided myself in by the monitor, I did not see the copter until it silhouetted in the sky, coming out of the tree line, it was pretty much over me at that time. Good Test

Testing with following a group of horses yesterday

Hey guys, I have been working on finding a decent solution where I can just quickly plug in my copter and fly. I believe I am getting pretty close to this solution, but the gimbal has been something I have been trying to figure out at an economical price. I bought the RCTimer Gimbal for about...

Like Bart I was just thinking I would post this, Over the two and a half years I have been building these copter, one thing I have not seen much mentioned about, is corrosion. I think its a subject worth a post mainly because it happens and I think it happen more then we know, or people...

Gusisin I attached the sensor to the bottom of the tray facing upside down and held it there by double sided foam tape like you use to hold window guards on and automobile. I would use that or 3m permanent mount tape, basically the same stuff just in much small amount, and thinner. I used that...

here is a good photo, basically there got two tarot motor mounts for 25mm and mounted them at the end of the carbon fiber tubes and it looks like it could work pretty nicely,I am thinking of doing the same, for now I am getting some good result from the servos, and the change over is not a...

gusisin take a look at which is shaking worst, also make sure the do not have it backwards on its axis, like in the program I check servo reverse on the tilt axis, If those are off thats what it did to me also. make sure its face up, or down. Did you update the firmware when you got it, also...

try this, it seemed to be a good start for me, it took few hours for me to get here but at the end of the its pretty close to where I have been running.

I have been flying two copters on 5.22 and everything is pretty good there.

classic :)

ya, I don't know if it was paid, but to say you can do what ever you want with a copter, but when there is a commercial value to it you can not do the exact same thing. At the end of the day you can not have it both ways, its either governed or not governed and the fact there is value put on the...

I'm right behind you !!!