Search results

tom66 Ya as business goes that's about right, however I can tell you this when I was originally looking for the frame, I found it on about 3 china websites, the cheapest was 402 and after shipping If I remember right it came out to be something like $440. When I purchased it here it was $429...

Another question came my way from an email, it asked if I got the frame from China ??? no I was able to get it state side from cnchelicopter.com

Answering some questions. Tom66 Quality is good, assembly is very simple, and fast. Frame is super strong, if I take two side by side booms and hold it up to my chest and push to each other, I question if I can break or fracture them. I have done that test no with all my...

Graupners, but APC have done fine for me also, just some crazy balancing sometimes with them.

hey guys just a quick update. I have been pretty busy with a lot of things but where I am with the copter is still working out the wiring. As I stated the build is pretty straight forward and I am very satisfied with the frame and its strength. The one thing I have run into is that if I want...

over all its going together well, I came across two things that had me wondering. the motor mounts did not seem like they were going to fit but after looking at the one page assembly guide I was able to figure it out, the second thing is the realestate for the the ESC's, I been thinking about...

Both motors have adequate power, and they can for sure do the trick. The lower the KV the more efficient on power consumption, if you use the right prop for the configuration you put on your copter. They are some good choices, I went with the tiger 4012 340kv. On the 4014 330kv the specs say at...

Basically, I am in the middle of building my heavy lift Octo, and when I mounted my new motor the power cables are coming up about two inches short of what I need. In the past I have read some stuff on the web concerning the length of motor power leads and that the can cause some problems. If...

Mike Think about it, Although this scenario is not exact and my technical translation is not all that great, some of it will make sense. if you just proportionally increased the size of your copter from a 4 to a 6 motor copter, you are adding a bigger frame, two more arms, two more motors...