Search results

Rehost, The gimbal is what it is and will only do what the stabilizer tells it to with a performance dictated by the servo's I have been getting some acceptable video test results with my extended CM130 point and shoot version. I upgraded the roll servo to savox and use HoverflyPro for...

TBH, really not sure whats going on with it. You should try and test the servo on another Rx or servo tester, Are you supplying it with 6V from a BEC?

pretty sure I'm getting about 12 minutes with 4000 4S, GP3, VTx+800 lipo, keep forgetting to turn my timer on, certainly noticed a big difference with Graupners and then a big difference jumping to 4S.

I get good flight times with 4000mAh 4S Gen Ace's

No stability issues at all, check out Giatrakos for some footage of Naza's on big birds.

I'm running a 900mm +4kg Hex on Naza, works pretty well.

Might be something ado with the Naza since the gimbal adjustable refresh rate FW upgrade, I have the same issue where I didn't before.

Xaircraft rubber grommets fit those load rails and they are much softer and absorb more vibration. I like having the 2 layers of vibe isolation, well 3 including the silicon sticky gyro pad thats holding on the GP Mount. but it was the Graupners that changed the vibe game for me.

similar to my 450, yours is pretty though!

Naza but doesn't support waypoints, otherwise Ardupilot mega but although cheap, wouldnt call it a starter setup. YS Y4, or whatever its called, fron Zero UAV, similar to Naza, similar cost but with waypointing, I think.

Thats what I've done Yuri, I think I'll can the certification plans with the HFP until I've added a GPS, it really takes that for it work at its full potential. Does the GPS improve the AH? I really want to make this work because its so bloody nice to fly.

No GPS JZ and got isues with AH.

I guess you have the Manual/AL set on a 2 pos'n switch on ch5 already and you want to mix another channel assigned to a dial with ch5. dont have a spektrum so cant be much help. Could you just asssign the dial straight to ch5 and switch mode/adjust gains with the dial. Dont know how the HF would...

Did Droidworx not have something like that in the pipeine, the Nova I think it was called. I guess the natural progression for Gressaero is to replace the motor booms with aerofoil wings

Raises the question: when does a toy or an RC aircraft become a 'drone'? seems a little totalitarian to criminalize something because someone might not like to see it. The privacy issue doesn't wash, If your flying close enough to windows to see inside then there more serious issues here, so...

I'm on 4.6r3, haven't tried AH again, I'll see if I can get the diagnostic 'Altitude' box to check first. Going back to the original topic. been functioning failsafe on the Rx, ie switching off the Tx. Not ideal form of Failsafe for MR's with variable loads, potential for flyaway is there. In...

Thats kinda what I wanted to hear JZ, I will have to find a longer USB cable and give that a go. Cheers.

Er.....which of course will not work either with a shagged baro!! Duh!!

OK so I ran diagnostics on Setup Utility and all boxes check except Altitude resulting in test Failure. guess I've got a goosed Baro sensor. Ah well who needs Alt Hold anyway, its got altitude reading on the OSD!

Its at the back of the course material. also a CAA format template online which is similar but better to go with EuroUSC's one and stick as closely to it as possible, then there will be fewer amendments to do when you submit it for approval.