Search results

I was going to remove all the ESC's to install in EVO booms and messed up removing the first one. So decided to just buy a set of ESC's for the EVO's. That is why there are only five booms here. They function perfectly (as perfectly as V1 booms can) and could be useful either as complete spare...

So I tried a set of these and yes, they do sound different to the stock DJI S800 props. They lack the aggressive buzz. But otherwise I saw nothing different with performance. What I didn't like, because the T-Motor props are slightly longer than the standard DJI props, was the really small...

8x Vislero 4S/5000mah flat LiPo packs. Very little use, full charge history available. Fitted with Gold Plated HXT 6mm bullets w/ Protector Flying time ranges from 1hr:19mn to 3hr:04mn (full details available) Purchased September 2011 for a MikroKopter Octo but then I got a DW AD-8 and the...

This is a big HURRAH for Secraft and their positively glowing attitude towards customer satisfaction. I ordered the Secraft retracts when they first appeared at the beginning of this year. In response to an email I sent simply asking for clarification of the reports I had seen about...

Although this has been mentioned in the 'Rant' thread I want to cast the net again in my search for a solution, since the dïckjerks at DJI are prevaricating and wasting time over pennies. The issue is that, although they apparently worked normally when first installed (a few weeks ago) since...

Like an idiot I went and sold my spare GH2 before the GH3 arrived. I have had the Secraft GH3 conversion kit sitting around for a while whilst I ummed and ahhed over whether to bother with the GH3 at all. There are only two reasons why I ordered the GH3: the ridiculous HDMI issue on the GH2 and...

AT the risk of double posting I decided to start a new thread on this because a) it might get seen by those who do not follow the IMUv2 thread and b) I want to find a quick solution to this rather baffling issue. First off the rig: S800/WKM w/ IMUv2/Z15G/DJI retracts/iOSD/bluetooth LED...

There are one or two posts that credit a couple of DJI representatives with attempting to be helpful but these are lost in the swathe of posts of frustration or anger with DJI for their lack of customer concern, particularly with regard to their 'upgrade' policy where original equipment has...

Do we know about this? The Aussies (& Kiwis) have come up with their own GoPro. Turned the sensor through 90° but otherwise appear to use pretty much the same case and fittings.

There must be a whole load of bog standard S800/WKM/Z15 setups out there and I suspect that very few folks use the default gain values as they all seem a bit high and possibly too reactive for AP. How about those with this standard setup posting their gain settings so that we can get an idea of...

This was to have been a late entry for the "Why use a Multi-Rotor" competition - except that closed about six months ago - but, as it contains vital and useful information, I have decided to post it anyway. As any S800 operator knows, the DJI S800 with the Wookong M Flight Control...

I am told one can go backwards, i.e. from FWv5.18 to FWv5.16, but a) how to get the older firmware package and b) how to load it? The default firmware process is all geared towards upgrading via an internet connection, rather than from a local file. Anybody know where to get 5.16 and load it?

Does anyone know the pitch of the standard DJI S800 15" flat carbon props? Firstly, I would like to change them anyway and secondly, I also want to get some steeper pitched props to cope with higher altitudes, but I would prefer to know the 'starting point' pitch to avoid buying unnecessary...

How precise can one expect the Roll axis to be at its default horizontal setting - default as in 'FPV Mode'? Having finally shelled out for the whole S800/WKM/Z15 package I am severely less than impressed. After the initialisation dance the Z15 Pan axis settles in all sorts of places and then...

GoPro HD camera kit with extras: Original waterproof case and all original cables, manuals etc. Skeleton Case plus spare back panel (has holes and slots for connectors - if required for LiveView video downlink, for example) Sunex lens conversion eliminates the aggressive barrel distortion...

Offers for this if anyone is looking for a micro mount? Supplied with original servos, everything works. Check out my other sales: Sony NEX 5n kit RTF MK Octo with spares and LiPo's Piclocs GoPro kit with extras

I currently have a whole DJI system on order - SJ-800, WKM & Z-15. The Z-15 is holding the whole thing up coz it ain't in stock and that gives me a little time to consider the rest of the order. The SJ-800 Shangri'la Wings is only on the shopping list as an airframe to carry the bit I really...

The Panasonic HDC-SD9 remains one of the physically smallest 1920 x 1080p25 camcorders. It is also unusual in that it was one of the last Panasonic consumer camcorders to feature 3CDD's before all manufacturers changed to the cheaper CMOS sensor. The significant advantage that CCD's hold over...

Time to start clearing my enormous stock of gear. This MK Octo flies well and without issues. Too many other distractions mean that it sits doing nothing. It is in perfect shape, is very well built, has never been crashed and has all the little extra bits that everyone eventually discovers they...

It is time for a virtual garage sale. Just far too much gear sitting around doing nothing. One of the items will be a NEX 5n kit. All in as new condition, 18-55 zoom, 16mm pancake, each lens with a UV filter, flash, 2x batteries, 2x chargers, gentLED shutter release, gentLED LiveView...