Recent content by Topflight

I think I figured it out. You need to spool up the motors and then it starts to register the data I was missing

Update: I purchased a 5 ohm potentiometer from radio shack and replaced the one that was in the radio. Works good now

Flying a Phantom 2. I'm getting all the correct data from IOSD mini except for the Distance and Azmuth. Both don't show any data. I shut off main battery once and it worked ok one time. Now it's not working again. Checked for loose cables. Have plenty of satellites 7+. Any ideas

Checked the shaft and it is not making contact with the pot. Added washers and it still won't reach. Compared the pot to the one next to it and its not near the same level. Can't add anymore washers or the handle won't have anything to attach to. Talked to a friend of mine and he had the same...

Thanks or the response. I have the HD-3D gimbal. I reloaded the firmware and now the assistant software shows that the gimbal is on. That problem is solved. The gimbal keeps the camera level, but now the switch on the back of the transmitter doesn't move the camera. When I go to the assistant...

I have a Phantom 2, setting it up with Assistant 3.2 The gimbal switch shows "off" in assistant and I can't find any place to turn it on. Where is this done? Thanks

Gopro advertises the Hero 3+ as being smaller and lighter than the Hero 3. Does this affect the Zenmuse H3 3D balancing or can either be used?

Dewster, I did try my RTH and it didn't do anything. I had my home port recorded and max satellites. Others have said the same thing when trying to use RTH on a fly-away.

sk8brd, Some answers to your questions. Purchased S800EVO last September. EVO arms are V3, it does have the anti-vibration kit, no IOSD (was just getting ready to buy one) was flying FPV with DJI's 5.8 transmitter, 2 5000mah batteries, IMU V2 location (see photo), hasn't been calibrated since it...

I have been flying my S800 EVO with, WKM, Zenmuse15 and retractable landing gear for approx 50 flights, with software 5.24. I was going to upgrade to latest version, but when I purchased the unit, the dealer told me to stay at 5.24, because thats how it was put together and it was test flown...

I have been flying my S800 EVO with, WKM, Zenmuse15 and retractable landing gear for approx 50 flights, with software 5.24. I was going to upgrade to latest version, but when I purchased the unit, the dealer told me to stay at 5.24, because thats how it was put together and it was test flown...

What are the best settings for the Sony Nex5 for taking aerial videos? My videos seem to be a little blurry

This is what I need to know. Starting with the Naza. Will also do my Wookong if I like the way it works. I'm trying to wire in a DJI mini OSD to a Naza V2. Can I wire it in series as shown in View 2? Right now I go from my Sony Nex5 to a mini HDMI converter using a HDMI cable, then out of the...

I'm trying to wire in a DJI mini OSD to a Naza V2. Can I wire it in series as shown in View 2? Right now I go from my Sony Nex5 to a mini HDMI converter using a HDMI cable, then out of the mini HDMI converter to my downlink as shown in View 1.

Thanks for the response. Let me look at this.