Jareth_Atian
Member
I am selling my 900mm VulcanUAV SkyHook; It's currently configured in Y6
format, but I have the other three arms available if you'd prefer to
make it a flat-hex.
This includes the 12mm rail mount system, dual-side battery trays and
a quick-release for the included VX5N 2-axis gimbal. It currently has 14"
gemfan wood props powered by Tiger MT3515-15 motors and Maytech MT40A Opto
ESC's. Also included are two Turnigy Nano-Tech 6s 5000mAh batteries and
four Glacier 6s 5300mAh batteries; The Glacier batteries have not even been
flown yet, they were just charged and discharged for storage.
A NAZA-M V2 flight controller is installed, as is an ImmersionRC 600mW video Tx.
A few spare props are also included.
This multirotor only has a dozen or so flights on it...it was originally constructed
for gathering semi-professional quality aerial footage, but my co-pilot moved
away and my day job got too busy for me to pursue photography jobs.
Note: In the picture, a Futaba sb2008 rx is installed. This is compatible with
the Futaba T8J radio (NOT INCLUDED!). If you have a different transmitter, you'll
need to supply your own receiver.
Note #2: Shipping an already-constructed hex this size is likely to be a tremendous
annoyance. Local buyers (California, silicon valley area) will get first dibs! If
there is no one interested locally, I'll consider disassembling this bird and selling
the parts individually.
$1500 OBO
format, but I have the other three arms available if you'd prefer to
make it a flat-hex.
This includes the 12mm rail mount system, dual-side battery trays and
a quick-release for the included VX5N 2-axis gimbal. It currently has 14"
gemfan wood props powered by Tiger MT3515-15 motors and Maytech MT40A Opto
ESC's. Also included are two Turnigy Nano-Tech 6s 5000mAh batteries and
four Glacier 6s 5300mAh batteries; The Glacier batteries have not even been
flown yet, they were just charged and discharged for storage.
A NAZA-M V2 flight controller is installed, as is an ImmersionRC 600mW video Tx.
A few spare props are also included.
This multirotor only has a dozen or so flights on it...it was originally constructed
for gathering semi-professional quality aerial footage, but my co-pilot moved
away and my day job got too busy for me to pursue photography jobs.
Note: In the picture, a Futaba sb2008 rx is installed. This is compatible with
the Futaba T8J radio (NOT INCLUDED!). If you have a different transmitter, you'll
need to supply your own receiver.
Note #2: Shipping an already-constructed hex this size is likely to be a tremendous
annoyance. Local buyers (California, silicon valley area) will get first dibs! If
there is no one interested locally, I'll consider disassembling this bird and selling
the parts individually.
$1500 OBO