So I was flying around, mainly just getting the feel of the new weight (camera and 5000mah battery) when it made a loud noise. I dropped throttle and landed hard. Apparently one of my props was cracked and it parted ways with the rest of the craft. It was only about 5-6 ft off the deck and landed in the dirt so no damage was done. I decided to try out a different pitch and size carbon prop as a replacement.
Got them installed and was checking it out when one of the props came off. The prop adapters were a real pain to get on the motor shafts so there must be something other than just not tightening them down enough, Anyway, this time it fell from about 30ft and broke one of the motor mounts. I'll buy some circuit board material and make a new one. I also have to get new prop adapters since the nut is nowhere to be found. At least I heard the prop hit the roof of my house and slide down onto the driveway, I got that back.
Got them installed and was checking it out when one of the props came off. The prop adapters were a real pain to get on the motor shafts so there must be something other than just not tightening them down enough, Anyway, this time it fell from about 30ft and broke one of the motor mounts. I'll buy some circuit board material and make a new one. I also have to get new prop adapters since the nut is nowhere to be found. At least I heard the prop hit the roof of my house and slide down onto the driveway, I got that back.