Aeronavics / Droidworx Retractable Landing Gear

[gtranquilla]

I am thinking of buying the Droidworx retractable landing gear but for my Cinestar 8..... should have bought the Droidworx MR apparently. I don't like the hanging tripod landing gear concept at all $$$$ and too much weight.
In any case can someone in this are suggest where I can buy this item and/or if it is possible to modify it to fit a Cinestar 8 or HL?

 

[kloner]

i'd go straight to droidworx since exchange rates are good now. it takes about a week

There is a few versions of gear, the long ones fit a red nice, some gimbals might need the room for a dslr. i run the medium legs with an ad quick release (its a kit) and got it on my hexacrafter easily... it just bolted straight to the bottom plate with 4 bolts and nuts. on the quick release the sky jib set has the thick rails and the wider standard pro mount, think it's 100mm spacing. it's for a red or dslr and is really nice, if in fact your gonna carry a dslr then get it. the ad set is a narrower 80mm spacing and has those 10mm rails that aren't as solid. it's a better gh3 mount. Both are fabulous pieces of engineering.

We had them walk apart from touching the rig on the ground, so we got used to booting it up and cycling the gear so the servo was powered and keeping the legs closed...... there worth the little trouble, they always work for us times 2 and often

This gear would be all up in the middle of a cinestar vibe iso gimbal mount.....