HI I am new to quad flying I have been given a flame wheel 450 with a naza gps but the friend who started it has passed away but i cannot find any paper instructions I am thinking that i should start at the begining as the motors are not working I HAVE MARKED THE ARMS 1 2 3 4 AND TAKEN OFF THE PROPS I WILL BE USING MY DX8 SPEKTRUM WITH THE 8000 FULL RANGE RECEIVER , BUT I HAVE FOUND SOME INFO ON LINE BUT IT IS NOT LIKE MY HELICOPTER WHICH IS THE BLADE 450 X SO IF ANY OF YOU OUT THERE CAN HELP WITH ANY TIPS ON THIS I WOULD LIKE TO HERE FROM YOU, AND AS, A PS THERE IS GAUI QUAD IN BITS AS WELL BUT IT LOOKS A BIT EASY TO SET UP IT LOOKS LIKE MY FRIEND WAS GOING TO MOUNT A HD CAMERA ONTO THIS TO FILM OUR TRAINS RUNNING AROUND OUR CLUB TRACK.:tennis:
New to Quad Flying
- Thread starter malc1955
- Start date
kloner
Aerial DP
how are you doing. so when you step into the multi rotor industry your dealing with a really young and not very organized group. Alot of it from china so we gotta deal with the hand dealt. once you build it, fly it, crash it, rebuild, repeat, you figure em out.
basicaly you have arm bolts and motor bolts. you bolt it up. the pads on the board are powered when a battery is connected to any of teh pads, but you want to use the one near the dog ear on the frame then hook the esc power to the little ones by the legs. for everything else, reffer to the naza manual as to what prop spins what way and so on. it is super simple, we'll guide ya in, but after that the addiction is your problem. don't send your wife yellin this way when you wont come in
lets get it flying first, then we'll worry about anything extra. use the dji it's easier. naza has something called a controlled stick movement, that's shown in the manual to start the motors, i'd suggest using it to turn em off to via the software your gonna have to get installed and use for naza.
http://www.dji-innovations.com/products/naza-multi-rotor/downloads/
remember, no wifes yellin
basicaly you have arm bolts and motor bolts. you bolt it up. the pads on the board are powered when a battery is connected to any of teh pads, but you want to use the one near the dog ear on the frame then hook the esc power to the little ones by the legs. for everything else, reffer to the naza manual as to what prop spins what way and so on. it is super simple, we'll guide ya in, but after that the addiction is your problem. don't send your wife yellin this way when you wont come in
lets get it flying first, then we'll worry about anything extra. use the dji it's easier. naza has something called a controlled stick movement, that's shown in the manual to start the motors, i'd suggest using it to turn em off to via the software your gonna have to get installed and use for naza.
http://www.dji-innovations.com/products/naza-multi-rotor/downloads/
remember, no wifes yellin
hjls3
Member
there are some great video online to help you out as well. one of my favorites is from patrick at aerial media pros. it is a 550 build - hexa not quad (same setup as you have just 2 more motors) but it is super informative and i bet it would help you. good luck and keep us informed.
Aerial Media Pros build video.
https://vimeo.com/39061641
Aerial Media Pros build video.
https://vimeo.com/39061641
HI AGAIN DO TO A PROBLEM I HAVE SENT THE NAZA GPS BACK TO BUZZFLYER IN THE UK AS WHAT EVER I TREID TO DO IT WOULD NOT PLAY, SO IT BACK TO SQ 1 AND WAIT TO SEE IF IT IS A FAULTY UNIT WHY I AM HERE WHAT LANDING GEAR WOULD YOU PUT TO THE 450 AS IT IS LOW AND I WANT TO PUT THE CAMERA UNDER SLUNG ANY IDEAS WHAT TO USE PLEASE REPLY AS I DONT NO WHERE TO LOOK. THANKS MALC:tennis: