My first DJI build- AD8 HL, DJI wookong

J

jakethomasmaine

Member
I started a DJI-based project a couple days ago, and figured I'd post some info about it. It would be done by now, but I'm waiting for some parts to come- hopefully it'll be in the air by the end of the week! The Wookong setup is ready to go on the frame, but a bunch of deans and bullet connectors have to come in before I go any further. It's going to be as easy as possible to break down for a travel case, and I'm aiming for a >10 minute breakdown and pack time. We'll see how it goes! http://instagr.am/p/Jdp4dpuM5X/

Setup:
AD8 HL with extended landing gear
DJI Wookong
Hobbywing 30amp esc's
Graupner 11x5 props
AXI 2814's
Photohigher AV200
Custom/redneck power distribution setup

I also took 5000+ pictures while I built the frame and made a little video of it. Hopefully someone will enjoy!

 
Last edited by a moderator:

mbsteed

mbsteed

aerial video centric
Fun Video. One suggestion - take the photohigher gimbal off the system before doing the maiden flight. Don't ask why I would suggest that - call it experience.
 





You must log in or register to reply here.
Top