jakethomasmaine
Member
I started a DJI-based project a couple days ago, and figured I'd post some info about it. It would be done by now, but I'm waiting for some parts to come- hopefully it'll be in the air by the end of the week! The Wookong setup is ready to go on the frame, but a bunch of deans and bullet connectors have to come in before I go any further. It's going to be as easy as possible to break down for a travel case, and I'm aiming for a >10 minute breakdown and pack time. We'll see how it goes! http://instagr.am/p/Jdp4dpuM5X/
Setup:
AD8 HL with extended landing gear
DJI Wookong
Hobbywing 30amp esc's
Graupner 11x5 props
AXI 2814's
Photohigher AV200
Custom/redneck power distribution setup
I also took 5000+ pictures while I built the frame and made a little video of it. Hopefully someone will enjoy!
Setup:
AD8 HL with extended landing gear
DJI Wookong
Hobbywing 30amp esc's
Graupner 11x5 props
AXI 2814's
Photohigher AV200
Custom/redneck power distribution setup
I also took 5000+ pictures while I built the frame and made a little video of it. Hopefully someone will enjoy!
Last edited by a moderator: