Max payload for DJI motor

[monster900]

Hi guys, yesterday finally i assembly my final version of F450+Naza, after many modification, i have a lendings kit and gimbal for gopro, the problem is that with F450+Naza+Gopro+Led+Tx Video+3S 3300mah Lipo the toal weight now is 1,6kg :dejection:
I use for first time Graupner 10x5 today and the prop are amazing without vibrations and much more quite, the problem is that i can't hover well because all it's too heavy. So i need to know if DJI 920kv motor can support this weight and i can try to use graupner 11x5 prop or it's necessary i upgrade to a hexa F550?
Can i try with other motor to use on F450 frame and same 10x5 prop?

 

[GGoodrum]

My F450 setup weighs 2035g, and it runs cool as a cucumber on two 4s2600 packs, even after 8-9 minute flights.. I'm using the Graupner 10x5s, but it also ran cool on the 9x5x3 GWS 3-bladed props. Anyway, I think your problem is not the blades, it is that you are using 3s. On 4s, the motors seem to be more efficient.

-- Gary

 

[monster900]

Thanks Gary for your info, yesterday i try with a 4S 2200mah and infact it's hover and have a lot of power again :tennis:
Now the weight is about 1.6kg, i need bigger 4S lipo i don't know is 4500 or 5000mah, with 2200mah i made max 5min.
Why you use 2 packs and not 1 only?

 

[kloner]

my 3000mah on everything the same except 2215 motors runs 10 minutes. When i tried 4s 5000 mah, i got 12 minutes. The extra weight ate more current and i personaly liked it a little lighter for flying. ready to fly i weigh 1590g, 10x5 graup

 

[GGoodrum]

Thanks Gary for your info, yesterday i try with a 4S 2200mah and infact it's hover and have a lot of power again :tennis:
Now the weight is about 1.6kg, i need bigger 4S lipo i don't know is 4500 or 5000mah, with 2200mah i made max 5min.
Why you use 2 packs and not 1 only?

I'm using these just because I already had them. I'd go with a 4s-3300 or a 4s-4000, if you want lighter weight, and a 4s-5000 if you want more endurance.

-- Gary