Losing Signal After 60ft

[subpar]

I am losing my signal after my F450 gets about 60 or so feet away from my monitor. Can someone provide me with some insight on what to trouble shoot to correct this issue?

I have the following equipment:

Monitor
http://aerialmediapros.com/store/fpv-items/384-7-monitor-w-built-in-diversity-receiver.html

Transmitter
http://aerialmediapros.com/store/fpv-items/404-32-ch-58-ghz-digital-tx-600mw.html

I'm also using a Zenmuse H3-2D and Gopro 3+

Thanks!

 

[DucktileMedia]

take a look at the thread below this talking about the 600mw immersion.

 

[subpar]

Thanks, I'll repost this there.

 

[kloner]

you want to make sure this is powered with a nice solder joint on a main power pad, they hate cold or otherwise crappy connections. change over to cp antennas. make sure the monitor your using is set to the proper ntsc.... not the one you want it to be, but the one that works best most have a few ntsc and a few pal modes. change over to cp antennas as fast as possible. i install and use the part you linked and it works great

if it's ever been powered without an antenna installed, it'll smoke the amps in the module

i have heard of 4s straight connections giving these problems with some units, also heard of people trying to use that unit on a tbs core have problems getting it enough power. it's a pig for energy. if it keeps giving you trouble, call mitch at the shop and see if he can give you any other pointers