Help needed with Naza-M failsafe with futaba T7CP

[zx12rcarl]

hia all,
can anyone help me with the setup of a futaba T7CP and setting the failsafe up.
ive seen this video http://www.youtube.com/watch?v=FsFUYeRz3Eo with it setup but ive been trying to get this to work
for hrs now and just can not sort it.

i have GPS, ATT, MAN, setup on the E = switch but just dont no how to setup the D = switch like he has done in the video
any help or suggestions on how to get this working

plus i have the futaba T7CP setup as PPM and in the naza assistant i have it set as Tradition and all works fine
but if i set it to PPM in naza assistant i get a RX-ERR dont no if thats right or not.

 

[zx12rcarl]

Thanks for the reply
Yes 8 channel be nice but stuck with what I have for now just down to cost
Do hope someone can help me out with this, someone on the forum must no how to set it up.

 

[zx12rcarl]

Hia gtranquilla
I've not got any probs with motors starting on my naza

I have all the command sticks in Green and all working
I have a 3 way switch setup with GPS, A, and M, and all working
And I can enable motors and fly my hex.

What I'm trying to do is setup failsafe on a switch on my futaba t7cp so if I'm flying around... I can flip
The switch and my hex will come back to the takeoff spot and land useing the gps.

 

[zx12rcarl]

well after messing around for a bit ive got it all working now... will post pics for anyone who needs this info

View attachment 10516View attachment 10517