helicoblast
Member
I'm selling our hexa from Flexacopter, as we don't use it anymore.
Arms and gimbal are quickly removable, and it comes with the unique dampener design from Flexacopter.com
This kit comes ARF with everything you see in the pictures, except the RC receiver.
You will need your own Tx/Rx, 2x5000Mah 4S battery, a 3S battery for the gimbal and your video downlink.
This rig has been flown about 50 times without problem, never crashed nor hard landing. Landing gear are custom made with carbon fiber parts, they are installed on the 3rd axis in order to move with the gimbal. We were mounting a Sony Nex5 or a CX730 on the gimbal, works flawless. Motors plugs are installed inside the arms, easy to install and remove, so it can be packed and transported securely.
We upgraded our fleet for bigger copters and this one is actually taking dust...
Here are some details:
Frame: Flexacopter S
Flight controller: DJI Wookong M, last firmware (5.16)
ESC: DJI 30A Opto
Motors: Tiger MT2814-10 (kv 770)
Props: APC 13x6.5
Gimbal: InfinityM 3 axis from HDAirStudio, 3rd axis motor replaced by a 5208-180T
Gimbal controller: Alexmos 8Bit with 3rd axis expansion board from Flyduino
Spare parts: 3 size of landing legs to be fitted on the arms (carbon fiber props are no longer included in the deal), original 3rd axis motor
We paid more than 4600$, asking 1500$+shipping
Paypal only, shipping worlwide.
I'm open to split it but I would prefer to sold it complete.
View attachment 22424 View attachment 22425 View attachment 22426 View attachment 22427 View attachment 22428 View attachment 22429 View attachment 22430 View attachment 22431 View attachment 22432 View attachment 22433 View attachment 22434
Arms and gimbal are quickly removable, and it comes with the unique dampener design from Flexacopter.com
This kit comes ARF with everything you see in the pictures, except the RC receiver.
You will need your own Tx/Rx, 2x5000Mah 4S battery, a 3S battery for the gimbal and your video downlink.
This rig has been flown about 50 times without problem, never crashed nor hard landing. Landing gear are custom made with carbon fiber parts, they are installed on the 3rd axis in order to move with the gimbal. We were mounting a Sony Nex5 or a CX730 on the gimbal, works flawless. Motors plugs are installed inside the arms, easy to install and remove, so it can be packed and transported securely.
We upgraded our fleet for bigger copters and this one is actually taking dust...
Here are some details:
Frame: Flexacopter S
Flight controller: DJI Wookong M, last firmware (5.16)
ESC: DJI 30A Opto
Motors: Tiger MT2814-10 (kv 770)
Props: APC 13x6.5
Gimbal: InfinityM 3 axis from HDAirStudio, 3rd axis motor replaced by a 5208-180T
Gimbal controller: Alexmos 8Bit with 3rd axis expansion board from Flyduino
Spare parts: 3 size of landing legs to be fitted on the arms (carbon fiber props are no longer included in the deal), original 3rd axis motor
We paid more than 4600$, asking 1500$+shipping
Paypal only, shipping worlwide.
I'm open to split it but I would prefer to sold it complete.
View attachment 22424 View attachment 22425 View attachment 22426 View attachment 22427 View attachment 22428 View attachment 22429 View attachment 22430 View attachment 22431 View attachment 22432 View attachment 22433 View attachment 22434
Attachments
-
IMG_1833.jpg58.3 KB · Views: 366 -
IMG_1834.jpg211.5 KB · Views: 344 -
IMG_1835.jpg183.8 KB · Views: 349 -
IMG_1836.jpg92.8 KB · Views: 376 -
IMG_1837.jpg164.8 KB · Views: 848 -
IMG_1838.jpg114.2 KB · Views: 688 -
IMG_1839.jpg115.3 KB · Views: 672 -
IMG_1840.jpg130.5 KB · Views: 697 -
IMG_1841.jpg202.3 KB · Views: 703 -
IMG_1842.jpg70.1 KB · Views: 700 -
IMG_1843.jpg97.7 KB · Views: 360