Flexacopter + WKM + brushless gimbal

helicoblast

Member
I'm selling our hexa from Flexacopter, as we don't use it anymore.
Arms and gimbal are quickly removable, and it comes with the unique dampener design from Flexacopter.com
This kit comes ARF with everything you see in the pictures, except the RC receiver.
You will need your own Tx/Rx, 2x5000Mah 4S battery, a 3S battery for the gimbal and your video downlink.

This rig has been flown about 50 times without problem, never crashed nor hard landing. Landing gear are custom made with carbon fiber parts, they are installed on the 3rd axis in order to move with the gimbal. We were mounting a Sony Nex5 or a CX730 on the gimbal, works flawless. Motors plugs are installed inside the arms, easy to install and remove, so it can be packed and transported securely.
We upgraded our fleet for bigger copters and this one is actually taking dust...

Here are some details:

Frame: Flexacopter S
Flight controller: DJI Wookong M, last firmware (5.16)
ESC: DJI 30A Opto
Motors: Tiger MT2814-10 (kv 770)
Props: APC 13x6.5
Gimbal: InfinityM 3 axis from HDAirStudio, 3rd axis motor replaced by a 5208-180T
Gimbal controller: Alexmos 8Bit with 3rd axis expansion board from Flyduino
Spare parts: 3 size of landing legs to be fitted on the arms (carbon fiber props are no longer included in the deal), original 3rd axis motor

We paid more than 4600$, asking 1500$+shipping
Paypal only, shipping worlwide.

I'm open to split it but I would prefer to sold it complete.

View attachment 22424 View attachment 22425 View attachment 22426 View attachment 22427 View attachment 22428 View attachment 22429 View attachment 22430 View attachment 22431 View attachment 22432 View attachment 22433 View attachment 22434
 

Attachments

  • IMG_1833.jpg
    IMG_1833.jpg
    58.3 KB · Views: 366
  • IMG_1834.jpg
    IMG_1834.jpg
    211.5 KB · Views: 344
  • IMG_1835.jpg
    IMG_1835.jpg
    183.8 KB · Views: 349
  • IMG_1836.jpg
    IMG_1836.jpg
    92.8 KB · Views: 376
  • IMG_1837.jpg
    IMG_1837.jpg
    164.8 KB · Views: 848
  • IMG_1838.jpg
    IMG_1838.jpg
    114.2 KB · Views: 688
  • IMG_1839.jpg
    IMG_1839.jpg
    115.3 KB · Views: 672
  • IMG_1840.jpg
    IMG_1840.jpg
    130.5 KB · Views: 697
  • IMG_1841.jpg
    IMG_1841.jpg
    202.3 KB · Views: 703
  • IMG_1842.jpg
    IMG_1842.jpg
    70.1 KB · Views: 700
  • IMG_1843.jpg
    IMG_1843.jpg
    97.7 KB · Views: 360

Top