Hello to all,
for first, big thanks to all wo helped me in my previous Thread where i had problems to arm the Motors. Terry from Dji connected via Teamviewer and figured out the Error-i had to reverse the E-Channel. I've learned a lot from you guys, and your assistance was heart - warming If you join the Dolomites, drop me a line and come over :nevreness:
I had a crash free maiden flight:
... and some questions again:
- As you see in the Vid, the Led is Blinking for Voltage Warning: I fly 3000 and 3300 4s for now, wich Values do i have to set in the Voltage Monitor?
- Double Sparking Led: In every Flight Modus the blue or yellow Light is double sparking... can't figure out why? Is that a problem? Following to the Manual Sticks are not at center/speed command is not at zero, what does that mean?
- 3 Way Switch/ Failsafe: After switching in Flight from Atti to M and the Hexa started like a Rocket in the sky i decided to set the 3-way switch to GPS-ATTI-Failsafe Any Problem with that? I do not think that i need Manual Mode for now...
-Failsafe: In the DJI Assistant, when i shut down the TX the Marker moves to Failsafe. R,E,A are at Center and T at Zero to the left. Is that ok? Should i try to switch to Failsafe in Flight? Will s**t my pants doing that
Next Steps: I love FPV and filming, i`ve started with that couple months ago with a Wing, here`s a short Vid:
For now i have ordered two different 2 Axis stabilized Gimbals with LG:
One from Jakub at www.quadframe.com and one from X468. Will report about those 2 Gimbals. I`d also try the Gimbal from GGoodrum, when he is ready for ship this Gimbal.
Cheers,
meme
for first, big thanks to all wo helped me in my previous Thread where i had problems to arm the Motors. Terry from Dji connected via Teamviewer and figured out the Error-i had to reverse the E-Channel. I've learned a lot from you guys, and your assistance was heart - warming If you join the Dolomites, drop me a line and come over :nevreness:
I had a crash free maiden flight:
... and some questions again:
- As you see in the Vid, the Led is Blinking for Voltage Warning: I fly 3000 and 3300 4s for now, wich Values do i have to set in the Voltage Monitor?
- Double Sparking Led: In every Flight Modus the blue or yellow Light is double sparking... can't figure out why? Is that a problem? Following to the Manual Sticks are not at center/speed command is not at zero, what does that mean?
- 3 Way Switch/ Failsafe: After switching in Flight from Atti to M and the Hexa started like a Rocket in the sky i decided to set the 3-way switch to GPS-ATTI-Failsafe Any Problem with that? I do not think that i need Manual Mode for now...
-Failsafe: In the DJI Assistant, when i shut down the TX the Marker moves to Failsafe. R,E,A are at Center and T at Zero to the left. Is that ok? Should i try to switch to Failsafe in Flight? Will s**t my pants doing that
Next Steps: I love FPV and filming, i`ve started with that couple months ago with a Wing, here`s a short Vid:
For now i have ordered two different 2 Axis stabilized Gimbals with LG:
One from Jakub at www.quadframe.com and one from X468. Will report about those 2 Gimbals. I`d also try the Gimbal from GGoodrum, when he is ready for ship this Gimbal.
Cheers,
meme
Last edited by a moderator: