Esc to MT-3515

[helidudu]

I am looking for Esc that have been well proven, to my Mt 3515 400kv motor 14-7" graupner e-prop on my CS8. Total weight not above 10kg
I have look at this one but no review http://www.copterdeluxe.com/Copter-Deluxe-Brushless-Regler-40A-ULTRA-PWM-OPTO-500Hz_1
also looked at this one. http://www.multirotor.co/product_info.php?cPath=6&products_id=103.

cant take the risk meeting the ground because of a bad esc:tennis:

 

[kloner]

sure your not after some 60-65 amp? maytech come to mind. what flight controller are you flying?

 

[helidudu]

I use graupner mc 20 Isn't 60-amp overkill?

 

[kloner]

depends how hot it is outside and what your flying style is like..... i wouldn't touch less than 60. There barely much bigger physically

 

[helidudu]

I live in Norway. At the moment about -3 C at summer time max 24. ok thanks for advice i will take closer look at them:tennis:

 

[kloner]

usualy ap work is all over the world........ i'd just make sure it'll handle whatever you can throw at it

 

[graham_newton]

I am using RCTimer simonk flashed 40amps with 6 cells. they barly get warm even on hot days (auw about 10 kg)