5.8ghz 25mW - which antenna's

[homer911]

I'm looking for some advice. I am very new to FPV, I have never built or used it!! I would like to get about a mile or so with a 5.8ghz 25mW system. I have read a lot about this system online and I know that I am limited to 25mW because of the UK regulations.

Am I right to say that I can use a skew planer and a cloverleaf antenna for the tx and rx? Which way, I'n not sure.

I am using a 2.4 tx for my MR.

I also know that the 5.8 is a little limited because it has some interference behind objects. This does not bother me so much.

Thanks

Steven

 

[kloner]

Trappy has been refining the CP antennas with IBcrazy and this is there focus, the 25mw 5.8.... there getting miles out of it but you need that new rx to take full advantage, and it's not ready. You'll be looking at patch and cloverleaf, same stuff i use

http://www.getfpv.com/team-blacksheep-5g8-patch-5dbi.html

http://www.team-blacksheep.com/products/product:111

match that with any right hand circular polarized cloverleaf and you'll be a happy camper

 

[homer911]

Cheers Kloner, Appreciate it.

Do you know when it would be ready for sale? Or where can I find out? Does IBCrazy have a website?

Steven

 

[kloner]

i gave you a link to the patch antenna in the USA or in Germany.... dunno what else your looking for

 

[homer911]

I meant for the new CP Antenna

 

[kloner]

any cp cloverleaf for the multi rotor is all else you need, that's a set. i like ibcrazy ones, but you can get whatever brand is easy

the only thing new is the immersion 5.8 receivers. uno 5.8 v2 or uno 5800 v3

its already in fat shark predator v2 and attitude goggles