2365g F550 to lift . . .
- Thread starter Ghiro
- Start date
kloner
Aerial DP
I fly quads,,,,,,,,,,, but that aint nothin. mine flies 2600 with 8000 mah and flies bitchen, got 28mm motors but only 4 of em. esc's are the same. with just one pack and 4,000 i'm 2260g
i use suppos 2810 and 2814....... there is ipower 2814 750 kv that would do this very well on a budget, they need 4s and 10" props. the setup you got now should hover it fine with 10", but if you go somewhere, theres a good chance of over rating your motors watt rating
i use suppos 2810 and 2814....... there is ipower 2814 750 kv that would do this very well on a budget, they need 4s and 10" props. the setup you got now should hover it fine with 10", but if you go somewhere, theres a good chance of over rating your motors watt rating
Hi Kloner,
i see, i'm a little concerned since the Spec's for my Exa report's a maximum lift of 2.4kg's and soon, with the incomming landing gear, more weight will be added. I suppose 350g more. The first thought is about changing the motors with something more stronger and able to lift at least 500g more than Spec's. Are motors lower holes pattern standard? On DJI's F550 motors have to be screwed in from the frame arms thru the motors lower can holes.
i see, i'm a little concerned since the Spec's for my Exa report's a maximum lift of 2.4kg's and soon, with the incomming landing gear, more weight will be added. I suppose 350g more. The first thought is about changing the motors with something more stronger and able to lift at least 500g more than Spec's. Are motors lower holes pattern standard? On DJI's F550 motors have to be screwed in from the frame arms thru the motors lower can holes.
kloner
Aerial DP
look into this route http://aerialmediapros.com/store/index.php?cPath=25_36