Search results

I've been doing the first few low level test flights with the Phantom 2 and H3-2D and have been having the same issue with each flight. After between 5:30-7:00 mins in the air it'll begin to yaw and wallow, loosing altitude as it goes. The first time it happened i was at head hight and i had...

I have an a/v pigtail for my gh2 zenmuse. I'm going to crimp it up for connection to an IRC vtx. The question is, do I need to split the ground so it goes to both the power connection and the gnd on the transmitter connector, or should I just have it going to the power connector? my gut feeling...

Been experiencing some issues with an H3-2D which i'm testing on my S800. The main issues is that the horizon keeps drifting, so if (on the bench) i tilt the S800 to one side, the gimbal will compensate for that, but when the S800 tilts back the horizontal will drift past level and remain on...

Just wondered whether anyone can offer some advice on this one. I've fitted a futaba SBE-1 sbus converter between my jeti receiver and the Phantom 2 naza. Looking at the RC pane in the Phantom assistant i can see that i now have a working connection with my radio of choice. HOWEVER, i seem to...

I'm starting the poll to gather some numbers with which i can go back to DJI. The simple request is "Please add 'traditional' and 'ppm' receiver types to the Phantom 2 assistant options" If as a Phantom 2 user, you would like this function - a function available to all other Naza hardware -...

I've mentioned this elsewhere, but: Phantom 2 Assistant. If anyone from DJI is listening PLEASE could you reinstate the ability to change/select the receiver type. This is a function that's has always been available in the Naza Assistant, but at the moment there is no way to switch receiver...

Phantom and H3-2D gimbal up for grabs. I built this with ALL DJI parts, as I had a spare Naza+GPS - so it's essentially a Phantom with an external GPS. The spec is: Phantom body (has my own black stickers, but will come with the red DJI sticker sheet too) Phantom control board for H3-2D -...

Just wondered if anyone knows which off-the-self peli case works for the phantom. I know there are specific cases available, but i'm not using the stock radio so would prefer to pluck foam to suit my needs - and maybe save a few £'s.

I have a couple of GoPro Hero/Hero2 related bits up for grabs: LCD backpack - £43inc first class recorded (uk postage) WiFi backpack with remote - £55inc first class recorded (uk postage) £85 for both ---

Wonder if anyone can offer some advice on best practise for failsafe receiver settings? So in the event of loss of communications between the radio and my S800 I want it to come to a halt/RTH I'm thinking, A, E, and R set to centre stick with T set to a point just below hover. IOC will be set...

Does anyone have a link to a download of the assistant for 5.20? DJI have moved everything around with their new website update, it's not listed anymore and previous links to it are all now 404'd Thanks,

I have a Jeti DC-16 radio up for grabs. I bought it (from an official UK supplier) as a stop gap to the release of the DS-16 and used it to set-up models on the bench. It's seen about 10mins of use outside and is in close to perfect condition. Comes with the Jeti aluminium case, euro charger...

Just had a go at upgrading my V1 naza with the latest firmware. procedure was straightfoward enough. Did a Tx calibration, but just sitting watching the Tx monitor i can see the flightmose channel intermittently flicking into failsafe. i'm not touching the laptop, radio or quad. It's just...

Has anyone swapped the stock receiver in their Phantom for something else - to use a preferred radio for example? Any pics or thoughts on the subject?

Until now, i've not used the WKM built-in battery monitoring functions - relying instead on balance cable lipo monitors, but for various reasons want to use the WKM voltage monitor now. Are the default values supplied by the assistant (23.10v - 0v = 23.1v and 22.20v - 0v = 22.2v) ok/safe to...

Wonder if anyone can help with this? I've just paired up an rsat2 and connected it up to a dji naza FC. I set up a new model on the dc-16 and assigned functions and servos. Everything on the radio output looks correct. I fired up the naza assistant and set it to ppm receiver type. All...

Does anyone know where i can get some simple ali or delrin 12mm boom clamps (in the UK)? I want to use them for making a simple pontoon to mount components on, between two gear rails.

i've got an odd component with my iOSD but don't know what its for as its not described in the instructions its a circuit board labelled SAO. it looks to sit on the video input connection, between the iosd and either a camera or feed from the zenmuse. ant thoughts on what it does whether i'll...

Just wondered whether anyone knows what the maximum current draw is for a fully loaded S800?

I have a new, unused, unopened futaba s.bus recevier up for grabs. Model number: R6202SBW. It's a small unit and is probably best used with the it's s.bus connection. £40inc Uk postage