Search results

In the past I have been using the DJI 30A ESC's and the DJI motors that come with the F450 ARTF kit but now that I am trying to custom build everything, I got tired of the DJI motors so I moved up to the T-Motor MT2212-13 980 kV motors. I hooked them up to my DJI 30A ESC and only one motors...

Turns out it was a faulty NAZA. Got a new one today and it works like a champ.

Just tried testing with a servo. Each channel works when, even the Aileron. Does this mean I have a problem with the Naza box or assistant?

I just finished all of the soldering and connecting of wires on my new F450 with Naza M V2. I have a Devo 10 controller which I used on my old F450 with Naza M V1. When I first plug into Naza assistant, I get a CFG Error: "Configuration error, this may cause by firmware upgrade from old...

Thanks! How do I find which way it is stuck?

Took a hard crash with my DJI F450. Got two arms replaced and when I tried to fly again, it wouldn't get off the ground in GPS mode. Manual mode worked fine as usual. I noticed the GPS unit came unplugged so I then tried to recalibrate. Horizontal calibration went fine but when I tried to do the...

I replaced a DJI motor that was not spinning and when I went to start it up, the motor on the same arm started smoking and shaking! Would that be the ESC or is it another motor?

I have asked DJI but not got a response. My quad will start when I push both sticks down and left, down and right, and down and out. For some reason, when I move the sticks down and inward, nothing happens. Down and in was the keystroke I used when I first started, but a few days later, that...

I flipped the switch to Failsafe, I did not turn the controller off. Not sure on the answer to your second question. Yes, Naza assistant does show the U slider moving into the failsafe position when I make the switch. I did have a solid GPS lock at the time. I am hoping calibration error is...

Yes I suppose I had my phone, and the pickup and garage was close by. I had read that but I did not realize why it was...

Has anyone ever had this issue? I just now realized one of my motors is smoked because the propellors were continuing to spin while the quad was crashed upside down.

Thanks! Anyone with Dji450, do you have the white arms in the front of back?

Would love to hear if anyone has any good ideas to be able to tell the front from the rear on my quad. Have a Dji 450 with red in front and white in back but once it gets far enough away there is no way to tell orientation. Thanks!

Hi, I have Dji 450 with naza and GPS. I was trying the FailSafe and when I flipped the switch and it went on a straight angle to the ground and took a hard crash and the props continued to try to spin while it was upside down. It was ugly. Why would this have happened?? I had just calibrated...

Reply But what makes the difference with there is no GPS connected? Shouldn't all modes be the same type of flying?

I've got a DJI F450 and currently do not have the GPS connected. Still when I am in "GPS" mode, the quad is much more stable. ;It seems like there are angles set up that it cannot go past. When I flip to manual mode, it is a completely different machine where the slightest move of the right...